While "good enough" gets the job done, there is beauty in going above and beyond. The SILCA SuperPista Ultimate is the pinnacle of what a floor pump can achieve. From the highly accurate analog gauge to the magnetic HIRO dock to the lathe-turned Purpleheart wood handle, this floor pump embodies the SILCA mantra of passion, precision, performance. - Full Stainless Steel, Aluminum, Wood and Brass Construction—NO PLASTICS - SILCA Lifetime PLUS Shield Warranty—the most comprehensive warranty in all of Cycling - Ergonomic Purpleheart wood and Investment Cast Stainless Steel Handle - Full IGUS Linear Bearings for Ultimate Smoothness - Thick Full Grain Leather Piston Gasket—More Efficient and Durable than Rubber! - 1% Gauge Accuracy allows for Ultimate Ride Tuning
The TLC PRO was made for the adventure enthusiast who wants the best equipment for on-the-go bike maintenance and vehicle tire inflation. The kit features a 30ft coil hose, a shop-style inflator with rotating Presta and Schrader attachments and a blow gun. The compressor charges the air reservoir and coil hose to 150PSI, storing enough air to provide a blast for seating tubeless bicycle tires, performing blowing tasks, running certain air tools and it is capable of inflating RV and truck tires up to 35". The TLC PRO comes in a deluxe carry bag and can be used as a portable or hard-mounted to the vehicle using the SAE battery clamps or terminal ring attachments included. The compact dimensions make it easy to store in your vehicle, keeping it out of the way and ready whenever you need it. FEATURES: – Shop-Style Inflator with 160 PSI Gauge – Fully Rebuildable Presta Head Attachment – 90° Twist-on Schrader Attachment – 30ft. Inside Braided Coil Hose – Blow Gun – Extruded Aluminum Air Tank – 2-Pin SAE Connection with Battery Terminal and Clamp Options – 40-Amp Inline Fuse Holder – Vibration-Resistant Diamond-Plate Sand Tray – Deluxe Carry Bag SPECIFICATIONS: – 12-Volt – Permanent Magnetic Motor – Duty Cycle: 33% @ 100 PSI – Max. Working Pressure: 150 PSI – Max. Amp Draw: 30-Amps – Ingress Protection Rating: IP54 – Dimensions: 10.87?L x 5.83?W x 7.48?H – Net Weight: 11.80 lbs. – Power Cord Length: 8 ft. – Air Hose Length: 30 ft.
With specifications more akin to a suspension fork than a traditional pump, the SuperPista combines a full metal shock piston design with the classic Italian leather plunger washer and self-lubricating linear bearings to create the highest-efficiency, smoothest-running SuperPista to date. Efficient, accurate, durable are the trademarks of the SuperPista floor pump. - High-mount digital gauge accurate to 1% with backlight, adjustable pressure alarm, and adjustable pressure units (uses two CR2032 batteries) - Full-size Ash wood handle with a secure carrier strap - High-efficiency 28mm SILCA leather piston assembly - Brass air check-valve assembly - Alloy barrel with plated steel piston shaft - Long filler hose with integrated Schrader chuck - Hiro locking-lever Presta chuck with a magnetic dock - Rated to 220psi
Will Ship within a week. When tire pressure matters, the Truth is your answer. Accurate to 0.2% and compensating for temperature, humidity, and elevation this is anything but just another gauge. - 100% Made in USA - 0.2% accurate between 0-60 psi - .5% at 100psi - 1% at 200psi - 3D Printed titanium body - Aluminum bleed valve - .1psi per minute bleed capability - 9v battery - 1,200 hour battery life - Temperature range 0 to 120F
25g CO2 Canister's from Specialized.
$219.99 - $249.99
The Klic Floor Pump effortlessly adapts to your needs with a magnetic quick-connect interface. The hidden hose with integrated gauge stores neatly away in the pump body when not in use, and can be used separately as a standalone tire pressure gauge. The optional burst tank installs or removes in seconds, and can be used either separately or integrated for installing and inflating tubeless tires with ease. - Burst tank can be pressurized to install and inflate tubeless tires - Tank is removable for easy transport - Hidden hose stores neatly in the body of the pump
The TLC PLUS is a high-performance compact compressor meant for on-the-go bike and vehicle tire inflation. The kit features a 30ft coil hose and a shop-style inflator with rotating Presta and Schrader attachments. The compressor charges the coil hose to 120PSI, storing enough air to provide a blast for seating tubeless bicycle tires, and it is capable of inflating vehicle tires up to 31". The TLC PLUS comes in a durable carry bag and can be used as a portable or hard-mounted to the vehicle using the SAE battery clamps or terminal ring attachments included. The compact dimensions make it easy to store in your vehicle, keeping it out of the way and ready whenever you need it. FEATURES: – Thermal Overload Protector – Shop-Style Inflator with 120 PSI Gauge – 120 PSI Pressure Gauge with Rubber Boot – Fully Rebuildable Presta Head Attachment – 90° Twist-on Schrader Attachment – 30ft. Inside Braided Coil Hose – 2-Pin SAE Connection with Battery Terminal and Clamp Options – Deluxe Carry Bag SPECIFICATIONS: – 12-Volt – Permanent Magnetic Motor – Duty Cycle: 30 min. @ 30 PSI – Max. Working Pressure: 120 PSI – Max. Amp Draw: 23-Amps – Ingress Protection Rating: IP54 – Dimensions: 6.8?L x 3.7?W x 6.5?H – Net Weight: 5.75 lbs. – Power Cord Length: 6ft.
$9.99 - $224.99
CO2 replacement cartridges Planet Bike's line of CO2 replacement cartridges make tire repairs quick and easy. - Our CO2 cartridges work in Planet Bike inflators as well as most competitors' inflators - Planet Bike cartridges are tested to the highest standards for durability, safety and reliability. They contain pure CO2 with no oils or contaminants. - Note - unable to ship CO2 to Canada - 100% recyclable steel cartridges - All threaded cartridges are compatible with Air Kiss, Red Zeppelin, Red Zeppelin 2 & Air Smith CO2. - All 16g cartridges are compatible with the Airship 2.0.
TyreWiz is the first-of-its-kind tire pressure sensor for riders of mountain bikes and road bikes. Lightweight, durable, and powered by a long-lasting user-replaceable coin cell battery, TyreWiz monitors air pressure in real-time and relays the data to a cycling computer or a smartphone. The TyreWiz app uses that data to deliver personalized recommendations and pressure alerts. For the first time, riders have access to highly accurate real-time tire pressure data to make decisions that can affect rolling resistance, traction, tire wear, and rider comfort. - TyreWiz is the first real-time tire pressure sensor for bicycle riders - Designed for all bike riders, regardless of their experience or bike’s intended use - Works with any tire that uses a removable Presta-style valve core: both tube and tubeless, and tires with anti-flat sealant - Data can be read on a cycling computer or smartphone with the app for iOS and Android - Smartphone app displays personalized recommendations, current tire pressure, and low/high-pressure alerts - Retail package includes two sensors, batteries, and a valve core removal tool - Use it for every ride to find the perfect combination of tire, wheel, and pressure in changing terrain and conditions - Include LED lights to indicate when pressure is outside the target range - Designed for road and mountain bike riders - Personalized tire recommendations in the smartphone app for iOS and Android - NFC pairing for fast and easy connection by BLE to a phone - Data reported with +/- 2% accuracy at .1 PSI resolution - Broadly compatible with tires that use a removable Presta-style valve core - Inexpensive, user-replaceable CR1632 battery lasts for 300 hours - IPX7 dustproof/waterproof rating - Box includes valve core removal tool for installation
The king has returned to rule! The new JoeBlow Ace DX features an innovative three-stage design that achieves both high pressures and high volume in record time. Stage one opens both barrels for big volume to reach 60 psi with 30% less effort than standard floor pumps. Stage two uses the main barrel only for pressures up to 120 psi while stage three engages the small barrel to achieve an amazing 260 psi. Two tone padded handles, wide stable base and new 4” base mounted analog gauge make inflation easy. The new SmartHead DX1 automatically adjusts to fit Presta and Schrader valves without swapping parts and the lower profile air release button makes getting the right pressure easy. Includes ball and air bladder type inflation needles. - SmartHead DX1 full metal pump head w/ air release button & x-long hose - Gauge: 260 psi / 18 bar; 4” base mount analog - Base: Aluminum/Rubber - Barrel: Anodized aluminum - Handle: Oversize dual tone - Weight: 2.45 kg / 5.4 lb - Size: 74 x 28 x 22 cm/29.1” x 11” x 8.7”
- Full alloy forged floor pump - Laser etched graphics - Full Oil Slick finish - Oversized alloy piston shaft-Smooth and quiet operation - Patented auto-switching head fits presta and schrader valves
Pista Plus is a floor pump that's built to outlast the rest of your cycling equipment. The durable steel barrel, 3mm-thick leather plunger piston design, combined with our proprietary brass air bridge and check-valve assembly ensure unrivaled longevity. The smaller-diameter barrel matched with the superior pumping efficiency of our classic 28mm 731 model Italian leather piston gasket and self-lubricating linear bearings means that Pista Plus is capable of easily reaching pressures up to 220 PSI. Pista Plus features a three-footed aluminum base and a full-size lathe-turned ash handle. The chuck dock on Pista Plus secures the chuck at the Schrader chuck allowing the rider to swap the standard chuck out for our HIRO chuck or Disc Wheel Adapter while retaining the ability to secure the hose to the pump. The large 64mm gauge is accurate to 2% and features a high-contrast face design. - Durable, high-strength steel barrel - Full-size lathe-turned ash wood handle with hose guide - High-efficiency SILCA leather piston assembly - Brass air bridge and check-valve assembly - 2% Accurate, heavy-duty 2.5" (64mm) gauge rated to 220PSI - Integrated Schrader chuck plus press-on alloy Presta chuck with Bleeder valve
With a conjoined secondary chamber that can be manually pressurized, Lezyne's Digital Pressure Over Drive floor pump is capable of conveniently seating tubeless tire systems. An integrated foot-lever opens and closes the chamber; when the chamber is full (Max. 220psi / 15 bar), flipping the lever down creates a powerful, continued blast of air that can seat road, mountain and plus-sized tubeless setups. This provides tubeless users an effective alternative to air compressors and CO2 units. Furthermore, a highly accurate digital gauge is incorporated into the pump for precision inflation when filling low- or high-pressure tires. Constructed from high-grade steel and aluminum, the Digital Pressure Over Drive is extremely durable and features an extra-long, nylon-reinforced braided hose. The innovative ABS2 chuck is both Presta- and Schrader-compatible and the system can also be used as a regular floor pump.
A floor pump and a tubeless setup tool in one. Set to Charge for a pressurized chamber that makes at-home and on-the-fly setup of tubeless ready (TLR) tires a breeze. Tubeless setup made simple TLR Flash Charger is the single-pump solution for daily use and at-home tubeless setup. It functions just like a standard floor pump when set to 'Inflate'. Switching it to 'Charge' gives the ability to pressurize a chamber and 'flash release' the stored air in order to seat tubeless tires without a bulky air compressor. Plus, it has a broad, back-lit digital gauge that delivers accurate pressure readings all the way to 160 PSI. Product details - Dual-chamber design with Inflate setting allows for efficient use as a traditional floor pump - Set to Charge for a pressurized chamber that inflates tubeless ready (TLR) tires without a compressor - Digital gauge provides easy-to-read accuracy up to 160 PSI (recommended maximum) - Compatible with both Presta and Schrader valves - Included inflation accessories conveniently stored in handle
The TLC LITE is the indispensable essential that provides a simple solution for on-the-go bike and vehicle tire inflation. The kit features a 30ft coil hose and a shop-style inflator with rotating Presta and Schrader attachments. The compressor charges the coil hose to 105PSI, storing enough air to provide a blast for seating tubeless bicycle tires, and it is capable of inflating vehicle tires up to 225/60R18. The TLC LITE comes in a rugged steel case with a durable handle, and is powered by simply plugging into your vehicle's power port. The compact dimensions make it easy to store in your vehicle, keeping it out of the way and ready whenever you need it. FEATURES: – Shop-Style Inflator with 120 PSI Gauge – Fully Rebuildable Presta Head Attachment – 90° Twist-on Schrader Attachment – 30ft. Inside Braided Coil Hose – Deluxe Carry Bag – Accessory Power Plug – Durable Leather Tipped Handle SPECIFICATIONS: – 12-Volt – Permanent Magnetic Motor – Duty Cycle: 10% @ 100 PSI – Max. Working Pressure: 105 PSI – Max. Amp/Watt Draw: 13A/156W – Ingress Protection Rating: IP54 – Max. Ambient Temp: +158°F – Min. Ambient Temp: -4°F – Dimensions: 9.64?L x 4.33?W x 9.68?H – Net Weight: 4.44 lbs. – Air Hose Length: 30 ft. – Power Cord Length: 10 ft.
The Pressure Over Drive is a floor pump with an integrated system designed to seat tubeless tires. This offers tubeless tire users a portable alternative to air compressors and eliminates wasting CO2 cartridges. It features a secondary chamber that can be manually pressurized and then released with the integrated foot-lever. This provides a strong, continued blast of air capable of seating road, mountain and plus-sized tubeless setups. It’s built for durability and reliability with its steel and aluminum construction, and its aesthetics are enhanced with a comfortable, stylish wood handle. The Pressure Over Drive has a 220psi (15 bar) pressurizing limit, with a built-in safety release in the event of over inflation. It comes equipped with an extra-long, nylon-reinforced braided hose and our Presta/Schrader-compatible ABS2 chuck. It can also be used as a regular floor pump. - ABS2 equipped
The aero-shaped barrel and wide steel base provide stability when pumping and the 3” top mounted gauge is easy to read up to 200 psi (14 bar). The large padded handle provides comfort while the extra-long and tangle-free hose can even reach wheels on bikes mounted in a stand. The SmartHead DX3 with lower-profile air-release button automatically adjusts to fit either Presta or Schrader valves and makes getting the right pressure a simple task.
An easy-to-read top-mounted digital gauge with rubber bumper impact protection delivers accurate tire pressure readings up to 200psi / 14bar. The large padded handle provides comfort while the wide steel base keeps everything stable. The extra-long hose can even reach bikes mounted in a work stand. The SmartHead DX3 automatically adjusts to fit Presta or Schrader valves and a new lower-profile air-release button allows fine tuning of tire pressure while preventing unintended pressure release. - Head: SmartHead DX3 w/ air release button & extra-long hose - Barrel: Painted steel - Gauge: 200 psi / 14 bar, Top mounted digital (Tolerance : < 100 psi ± 1 psi / > 100 psi ± 1%) - Unit: psi, bar, kg / cm² - Battery: CR2032 x 1 (included) - Volume Per Stroke: 337cc - Handle: Oversize padded / Dual density polymer - Base: Hardened steel - Cushioned rubber for digital gauge protection, auto off, Dunlop valve adapter, Presta valve adapter, Ball / bladder heads, Hose dock - Size: 73.5 x 25.5 x 16.4cm / 28.9" x 10" x 6.5" - Weight: 1.97kg / 4.34lb
Originally designed in the 1950s when the Bianchi-Pirelli team requested a pump that could fit under the rear seat of the Fiat team car, the Pista pump quickly became an icon of professional team cars and mechanic workstations at 6-Day track events around the world. The compact form of the pump, and the ability to lay completely flat, allow the pump to take up minimal space in a trunk, duffel bag, or larger tool kit, making it a true icon of the sport amongst the cycling cognoscenti. In 2017, we took all of the qualities of the original Pista and introduced a re-engineered, limited-edition version of the pump with the iconic Molteni orange barrel to celebrate 100 years in business. These modern orange pumps were initially meant to be a limited-release product to celebrate our heritage, but the positive response and demand for the product have continued. As we're now in our second century of making high-performance pumps, we're pleased to make Pista part of our permanent floor pump line-up and will offer it in a modern red livery moving forward. - Durable, high-strength steel barrel - Compact ash wood handle with hose guides - High-efficiency SILCA leather piston assembly - Brass check-valve assembly - Long filler hose with integrated Schrader chuck - Push-on alloy Presta chuck with bleeder valve - Rated to 220psi
Built and designed for bicycles, the INF-2 utilizes a redesigned, more durable, dual-sided, 360º rotatable Presta and Schrader head. The INF-2 also sports a new, lighter weight body and a redesigned trigger to facilitate multiple hanging options. It features a built in pressure gauge (0–160 psi, 0–11 bars) with a protective gauge boot, and the body accepts any 3/8" NPT male threaded fitting. Built for everyday shop use and 100% rebuildable!
The digital update of the tried-and-tested Airstep foot pump impresses with a high-quality, precise digital gauge. The black LED display shows the pressure perfectly in bright orange numerals. The first-class sensor technology with a deviation tolerance of up to 1.5% guarantees a high measuring accuracy, thus ensuring optimum tire-pressure adjustments. Another innovation is the powder-coated aluminum foot pedal. Thanks to its scratch-resistant coating, it not only offers high-impact resistance, it also impresses with its modern black appearance.
16g CO2 Canister from Specialized.
The CNC Digital Drive is the ultimate, professional-grade bicycle floor pump which features a large digital gauge. Its full CNC-machined aluminum construction and hardware are built to last a lifetime, and replacement wear parts are readily available. Highly accurate, easy-to-read 3.5” (88.9 MM) digital gauge. The CNC Digital Drive comes with an extra-long, nylon-reinforced braided hose with aluminum couplers. At the end of the hose is the top-of-the-line ABS1 Pro floor pump chuck. - CNC-machined aluminum construction - Precision 3.5-inch digital gauge (220 psi / 15 bar) - Extra-long nylon reinforced braided hose with aluminum couplers - ABS1 Pro for Presta and Schrader chuck
The JoeBlow Sport with unique 2-stage design delivers both high pressure and high volume in record time. Stage one opens both barrels for huge volume, reaching 30 psi with 30% less effort than standard floor pumps. Stage two utilizes the small barrel for pressures up to 160 psi. Hammer type TwinHead DX5 pump head with an extra-long and tangle-free hose makes it easy to reach valve stems. A durable steel barrel and large steel base provide extra stability. - Head: Hammer type TwinHead DX5, Presta / Schrader / Dunlop valves with extra-long 360 pivot hose - Barrel: Painted steel / anodized aluminum - Gauge: 160 psi / 11 bar, 3" mid mount analog Stage 1 : 0 - 30 psi Stage 2 : 30 - 160 psi - Volume Per Stroke: 715cc (Stage 1), 258cc (Stage 2) - Handle: Oversize / Dual density polymer - Base: Hardened steel - Ball / bladder heads, Hose dock - Size: 74 x 26.6 x 18cm / 29.1" x 10.5" x 4.6" - Weight: 2.5kg / 5.51lb
- Magnetic hose attachment - Hidden hose in the body of the floor pump - Quick connect for gauge to be mounted to pump - Hose is magnetically held inside the pump - Tripod base for added stability - 160 psi / 11 bar - Universal head for presta / schrader (fully threaded presta valve bodies only) - Large, accurate analog gauge
- Top of the line solution when it comes to inflating bikes - Features updated MV Easy Head and sturdy steel construction - Digital gauge makes accurate inflations a breeze and is accurate to hundredths - Updated MV Easy Head valve allows for Presta/Scrader
The Airstep Bicycle Foot Pump combines the virtues of a classic floor pump with a foot pump. - Extra-large pressure gauge - Integrated storage space for the spiral hose and head - Aluminum foot pedal allows you to inflate with the ergonomic strength of your legs - Pump locks down and includes a wall bracket as a space-saving solution - Inflates to 7 bar/102 psi - Compatible with Presta, Schrader, and Dunlop Valves - Made in Germany
Lezyne's CNC Floor Drive is the ultimate, professional grade floor pump. Full CNC-machined aluminum construction and hardware. Oversized 3.5-inch precision gauge. 220 psi max. Extra-long, nylon-reinforced braided hose with aluminum couplers. Durable anodized high-polish finish. - ABS2 equipped.
An easy-to-read mid-mounted digital gauge delivers accurate tire pressure readings up to 160psi / 11bar. Hammer type TwinHead DX5 pump head with an extra-long, tangle-free hose makes it easy to reach valve stems. A durable steel barrel and large steel base with ergonomic padded handle make it easy to get your ride up to pressure fast. - Head: Hammer type TwinHead DX5, Presta / Schrader / Dunlop valves with extra-long 360 pivot hose - Barrel: Painted steel - Gauge: 160 psi / 11 bar, Mid mounted flip-down digital (Tolerance: < 100psi ± 1 psi / > 100psi ± 1%) - Unit: psi, bar, kg / cm² - Battery: CR2032 x 1 (included) - Volume Per Stroke: 318cc - Handle: Oversize padded / Dual density polymer - Base: Hardened steel - Cushion rubber for digital gauge protection, auto off, Ball / bladder heads, hose dock - Size: 68 x 25.4 x 18cm / 26.7" x 10" x 4.6" - Weight: 1.8kg / 3.97lb
Specialized's Air Tool UHP Floor Pump makes it easy to dial in your fork and shock. With a cast aluminum base and an aluminum barrel, this sturdy floor pump reaches 350psi with ease. What's more, the micro air bleeder makes it easy to set the perfect pressure.
Page 1 of 12 Next page