The new 8-Bit System is a group of multi-tools designed to work together to solve most trailside fixes. They are lightweight, strong, versatile, and small enough to fit in a jersey pocket or riding tool wrap. Three multi-tools begin the 8-Bit System: 8-Bit Chainbreaker + Utility Knife Multi-Tool, 8-Bit Tire Lever + Rim Dent Remover Multi-Tool, and 8-Bit Pack Pliers. A total of 22 functions between the three tools will keep you rolling to the next town or trailhead. - 17 functions: spoke wrench; valve core wrench; flat head #3.5 and Phillips #2 screwdriver bits; 2, 2.5, 3, 4, 5, 6, and 8mm hex; and T10, T25 Torx-compatible bits; install and remove master links; clear tire sealant clogs from valve stem; tighten valve stem lock nut - Magnets keep all bits in place - Ball detent swivel head helps access hard-to-reach places - Handle doubles as breaker bar for extra torque when head is bent - 8mm hex bit tested to over 40 Nm torque - Pliers works with 9-, 10-, 11- and 12-speed master links and chains (not compatible with Campagnolo 12-speed chains) - Master Link storage is compatible with SRAM PowerLock Link, Shimano Quick-Link, KMC Missing Link and other similar master links (not compatible with Connex Links by Wipperman)
$6.95 - $209.95
Wolf Tooth WT-1 Chain Lube is a synthetic lubricant and a chain treatment in the same bottle. As a synthetic chain lubricant, WT-1 will improve the mechanical efficiency of your drivetrain while lasting 3-5x longer than most other chain lubes. As a chain treatment, WT-1 will clean your chain by pushing dirt and debris to the surface where it can be wiped away. It will also protect your chain in all riding conditions, and allow you to ride longer between applications. - Cleans, lubricates, and protects chains - Peak performance in all conditions, wet and dry - Also works on other places of your bike, including hubs, cables, and jockey wheels
This 29mm open bore adapter is used to press 29mm x 42mm (DUB) sealed bearings. The adapter is machined with one step at 29mm OD, which fits into the center of the sealed bearing. For use with Wheels Mfg. bottom bracket press (PRESS-7 , PRESS-7-PRO or PRESS-9-PRO). - Inner step outer diameter: 28.9mm - Outer diameter: 41.8mm - Thru hole diameter: 12.8mm (1/2-inch) - Thickness: 7mm - Machined, red anodized aluminum - Sold individually
BB30 service kit for SRAM DUB cranks. - Includes (2) Enduro 6806/29 ABEC-3 sealed bearings and 2 retaining clips - Bearing Dimensions: OD: 42mm / ID: 29mm / Width: 7mm - Enduro ABEC-3 bearings - Use with SRAM DUB cranks Note: SRAM DUB cranksets are not designed to work in 68mm or 73mm wide shells with inboard bearings. Use only if your frame is a direct-fit bearing system, and the BB shell width is 86.5mm or wider.
6-piece screwdriver set with Kraftform Plus handle for pleasant, ergonomic working that prevents blisters and calluses. - Hard gripping zones for high working speeds, while soft zones ensure high torque transfer - Partially Lasertip: the tip literally bites into the head of the screw and thereby prevents any slipping out of the screw head - "Take-it-easy" Tool Finder: color coding according to profile and size. - The hexagonal anti-roll feature prevents any bothersome rolling away at the workplace - Includes practical rack for tidy storage of the screwdrivers - Screwdriver for slotted and cross-recess screws, Phillips - Multi-component Kraftform handle for fast and ergonomic screwdriving
$4.16 - $8.01
High-quality Kraftform Plus screwdriver. Multi-component Kraftform handle for fast and low-fatigue working. Kraftform Plus: hard gripping zones for high working speeds whereas soft zones ensure high torque transfer. Hex-Plus offers a larger contact surface within the screw head. This reduces the notching effects to a minimum and almost completely eliminates the risk of destroying the screw recess. "Take-it-easy" Tool Finder: color coding according to profile and size. The hexagonal anti-roll feature prevents any bothersome rolling away at the workplace. - Hexagonal screwdriver hex-plus - Multi-component Kraftform handle for fast and ergonomic screwdriving - Take-it-easy tool finder: color coding according to profile and size - Hex-plus allows socket head screws to live longer - Hexagonal anti-roll feature against rolling away
High-quality L-key set out of stainless steel for hexagon socket screws by Wera. The Hex-Plus profile offers a greater contact surface in the head of the screw; the notching effect is therefore reduced to a minimum and damage to the screw head is more or less eliminated. Comes with hex ballpoint on the long arm: the ballpoint drive profile means that it is possible to swivel the tool axis away from the screwdriving axis, thus enabling "round the corner" screwdriving. - Stainless steel prevents the transfer of extraneous rust: fasten stainless screws with stainless tools - Hex-Plus allows socket head screws to live longer - With Take-it-easy tool finder: color coding by size - Wear-resistant clip material for enhanced durability - Color-coded, easy-to-grip plastic sleeve, even at low temperatures - Comes in an almost wear-free L-key clip fastener
$4.07 - $8.81
High-quality Wera L-keys with color-coded, convenient plastic sleeve. The tool is quickly accessible and the ergonomic and pleasant handle is easy on the hands even at low temperatures. The Hex-Plus profile offers a larger contact surface within the screw head. This reduces the notching effects to a minimum and almost completely eliminates the risk of destroying the screw recess. The ball-end on the long arm allows for reliable working even in difficult installation situations. The BlackLaser surface treatment provides outstanding surface protection, even against corrosion, and a long service life. The tools are quickly to hand thanks to the laser-engraved and thereby wear-resistant size markings on the L-keys. - L-keys for hexagonal socket screws - Hex-Plus allows socket head screws to live longer - Color coded, easy-to-grip plastic sleeve, even at low temperatures - Hexagonal ballpoint on the long arm - Wear-resistant size marking
- High quality set of L-keys - Hex-Plus. - The ball on the long arm allows safe working even in difficult mounting positions. - The BlackLaser surface treatment provides surface protection, corrosion resistance and long life. - Laser coated abrasion-resistant size markings on the L-keys for quick access.
High-quality L-key set with color-coded, convenient plastic sleeve. This ensures that the tool is quickly to hand and the ergonomic and pleasant handle is easy on the hands even at low temperatures. The wear-resistant clip material ensures secure storage of the L-keys as well as simple removal. The Hex-Plus profile offers a greater contact surface in the head of the screw. The notching effect is therefore reduced to a minimum and damage to the screw head more or less eliminated. The ballpoint on the long arm allows dependable working even in difficult installation situations. The BlackLaser surface treatment provides outstanding surface protection, even against corrosion, and a long service life. Laser-engraved and thereby wear-resistant size markings on the L-keys for rapid accessing. - Hex-Plus allows socket head screws to live longer - Hexagonal ballpoint on the long arm - With Take-it-easy tool finder: color coding by size - Color coded, easy-to-grip plastic sleeve, even at low temperatures
High-quality L-keys for recessed TORX screws. Comes with a holding function: the wedging forces resulting from the contact pressure between the drive tip and the screw profile securely hold the screws on the tool at both ends. The BlackLaser surface treatment provides outstanding corrosion protection and a long service life. Available in a practical clip fastener, whose wear-free material provides secure storage for the L-keys and enables simple removal. - Holding function for recessed TORX screws - BlackLaser surface treatment for corrosion resistance - "Take-it-easy" tool finder: color coding by size - Color coded, easy-to-grip plastic sleeve, even at low temperatures - Includes: 1x TX 8x76 mm, 1x TX 9x79 mm, 1x TX 10x85 mm, 1x TX 15x90 mm, 1x TX 20x96 mm, 1x TX 25x104 mm, 1x TX 27x112 mm, 1x TX 30x122 mm, 1x TX 40x132 mm
The 16-piece set from the screwdriving tool specialist Wera solves the most important screwdriving problems associated with bicycles—reliable control of applied torque to protect sensitive components—with a click-torque wrench in the unmistakable Wera design. It features a very robust design with high accuracy, along with easy setting and saving of the default values. The audible and tactile snapping on reaching the scale values facilitates the safe setting of the desired torque values, while the robust release mechanism guarantees a clearly audible and tactile trigger signal when the set torque is reached - 16-piece wrench set for bicycle applications with torque control including Wera Clique-Torque wrench A 5 (2.5-25 Nm) - Sockets and bit sockets for the most popular screw profiles on road bikes, mountain bikes, and e-bikes - Easy setting and saving of the desired torque value with an audible and tactile click when the scale value is reached (click 1) - Safely quantified force: when the set value is reached, the torque wrench triggers audibly and noticeably (click 2) - Precise to +/- 4%
$48.50 - $97.65
With its continuous and parallel jaws, the Joker 6004 replaces several single spanner sizes. The required size is automatically and continuously set when attaching the tool to the hexagon bolt or screw. The integrated lever mechanism securely clamps the hexagon screw or bolt between the jaws, reducing the risk of slippage or damage. The ratchet feature ensures fast and consistent screw driving without removing the tool. By using the corner-width rectangular prisms, a return angle of only 30° can be achieved. The single-arm design, in conjunction with the ratchet feature and the corner-width prism, makes it possible to work even in confined spaces. - The adjustable Joker 6004 covers all metric and imperial dimensions in the respective field of application - Automatic and continuous grip of hexagon screws and bolts - Lever mechanism when gripping avoids slipping and damage - Fast and consistent screwdriving without removing the wrench thanks to mechanical ratchet function - Return angle of only 30° through placement in the corner-width rectangular prisms in the mouth
$6.99 - $17.99
Material: premium chrome vanadium steel
$7.99 - $147.15
- Light viscosity oil for deep penetration with teflon for durability - Law prohibits orm-D materials from shipping by air
An advanced service kit for the home mechanic as well as the bike shop mechanic. Includes all the parts and tools needed to service TRP and Tektro brakes. Just add mineral oil. Contains the following items: - Hose cutter - Two premium syringes with thread-on hoses - Bleed port adapters - Bleed blocks for 2, and 4 piston calipers - Assortment of compression nuts, olives, and barbs for both 5.5mm and 5.0mm hose Hose Diameters: - DH-R EVO, Quadiem, Slate T4: 5.0 mm - All other TRP and Tektro Brakes: 5.5 mm
- Removes brake pad material from alloy rims without damaging it - Use just like an eraser
- 5 DART plugs for use with the Stan's NoTubes DART tool
Stan's Dual Action Repair for Tubeless (DART) fixes damaged tires faster, easier, and better than existing plug tools. While traditional tire plugs try to wedge rubber strips into a puncture, the DART creates a chemical reaction with your Stan's sealant to quickly form a permanent airtight bond. The DART's plastic tip is barbed to anchor firmly in place and stay put during even the most aggressive riding while being safer for rims, rim tape, and your hands. The material of the DART is also more flexible, and its laser-cut shape is optimized to contour to the shape of different punctures, maximizing surface area to increase the sealing reaction. Because the DART anchors to your tire and creates an instant bond with your sealant, it also won't pull out while riding the way a conventional plug can. One of the best features of the DART's design is that it doesn't require trimming once inserted, and excess material won't get in the way of your ride. DARTs can't be felt while riding, even on road tires, and they wear smooth naturally. - Repairs large punctures and slices - Reacts with Stan's sealant to form an instant, airtight seal - Barbed plastic tip anchors into tire and will not pull out when riding - Flexible material and laser-cut shape conforms to puncture and bonds with sealant - Wears off clean, no trimming needed, and can not be felt while riding, even on road tires - Lightweight, compact tool fits the shape of your hand for more precise use and includes built-in valve core remover - Includes two pre-loaded DARTs for sealing multiple and larger punctures - Clear caps keep DARTs clean and unthread quickly for fast deployment - Simple and easy to refill
Before you find yourself in a bind, it's important to plan on how you'll get out of one. Well, look no further than our SWAT Conceal Carry MTB Tool. It stashes an emergency multi-tool and chain breaker inside the steerer tube of a suspension fork for easy transport and instant access. On the tool, you'll find a wide array of Allen keys and a Torx wrench, so you'll be able to get out of any trail-side jam. - Stores a multi-tool and chain breaker in the steerer tube of most modern suspension forks with alloy steerer tubes. - Quick-action top pivots away to release spring loaded multi-tool. - Features hardened CRV steel bits with anti-rust coating and forged alloy frame. - Includes 3, 4, 5, 6, and 8mm Allen keys and a T25 Torx.
$30.00 - $35.00
Specialized's Top Cap Chain Tool replaces your top cap and places a chain tool and spare chain quick link inside your bicycle fork's steerer tube. This way you'll never forget your chain tool. This tool can be installed in any 1-1/8th inch steerer tube that is at least 32mm deep. It's available in models that work with either aluminum or carbon steerer tubes.
$37.50 $50.00 25% Off
This Zee Cage II was designed with an integrated EMT Cage Mount MTB Tool that has all of the trailside necessities required to get you out of a jam on your ride. For the cage itself, you'll find it to be respectably lightweight, and to have incredible holding power for when the trails get rough. For easy bottle access, we also gave it a unique side-loading design that allows you take pulls from the right or left-hand side depending on placement. - SWAT design allows for storage and tool integration. - Reinforced composite material improves durability without adding weight. - Includes EMT Cage Mount MTB Tool with 3, 4, 5, 6, 8mm, T25 Torx, and #1 flathead screwdriver. - Right-hand loading on the down tube—left-hand loading on the seat tube. - Sleek, minimalist design with razor-sharp graphics.
Shimano Hydraulic Disc Brake Fluid - Non-corrosive mineral oil that offers excellent heat expansion properties - Mineral oil will not absorb water from the air - Not caustic and is non-toxic
Shimano Genuine disc brake bleed syringe kit Features: - Strong threaded tube joint - Bleed nipple tool - Locking clip - Bleeding instructions available for download under 'Documents & Links' below
Shimano Genuine disc brake bleed Funnel unit for ST type Road brake lever (M7 thread bleed port) Features: - Oil spill guard lid with an integrated oil stopper holder - Funnel base - Bleeding instructions available for download under 'Documents & Links' below
Shimano Genuine disc brake bleed Funnel unit for BL type MTB brake lever (M5 thread bleed port) Features: - Oil spill guard lid with an integrated oil stopper holder - Funnel base - Bleeding instructions available for download under 'Documents & Links' below
The new B-gap adjustment tool is simple and easy to use, allowing for a quick set up experience. Small enough to be able to pack in your ride bag or stash in your toolbox for repeated use, it is also industrially recyclable if you find you no longer have use for it. This is the most precise tool for setting up and adjusting your drivetrain.
$8.18 - $22.00
Rock-N-Roll Gold lubricant is for both mountain and road bike use. The formulation goes deep down into the chain and traps any dirt. Then, with the energy of the chain freewheeling backwards, the dirt and grit floats to the surface so you can wipe it all off, leaving a new and clean application of lube inside the chain, where it's needed. - All-purpose lube - Cleans and lubricates simultaneously
- Alloy body with chrome plated tools - Hex 2 / 2.5 / 3 / 4 / 5 / 6 / 8mm - PH2 screwdriver
$11.00 - $64.00
- Makes your bike shine like new and keeps it that way. - Biodegradable formula cleans, polishes, and protects in one step. - Also great for dropper posts, suspension, and for seating tire beads. The original bike polish, Bike Lust's proprietary silicone-based formula includes a biodegradable cleaning agent. Bike lust goes on wet, quickly cleaning light dirt and grime as it polishes, and then dries to a beautiful protective coating. Works on any surface or material in one simple step making your bike look like new and future cleaning easier! Also great for dropper posts, suspension, and for seating tire beads. Bike Lust can be used on all types of materials and finishes including carbon fiber and matte finishes. It's also fantastic on tires to help shed mud and dirt as you ride.
- New design with dual 15mm openings and 24mm socket driver. - Features extra long 350mm length and dice grip handle. - Designed to stand up to the harsh conditions of professional use. - Improved ergonomics makes pedal removal easier. A quality pedal wrench is worth its weight in gold. The new and improved Pedro's Equalizer Pedal Wrench II makes quick work of even the toughest pedals and now doubles as a socket driver wrench for use with Pedro's professional socket tools. Features include an extra long, 350mm length, tubular handle with dice grip for control and comfort, heat-treated chrome-moly steel construction for the ultimate strength and lasting performance, new 24mm socket driver, and new dual precision cut 15mm wrench openings positioned at 30 and 75 degree offsets for optimal mechanical advantage and wrench positioning. Backed by Pedro's lifetime warranty.
- Micro Lever Compatible - Backed by Pedro's Lifetime Warranty and Rust-Free Guarantee - Hex Wrenches: 2.5, 3, 4, 5, 6, 8mm - T25 and T30 torx - Flat blade screwdriver - 95 grams Pedro's new Rx Micro multi-tool is ready for trailside repairs and daily adjustments and delivers the perfect balance of size, weight, and function. It's designed for performance and durability with a 6061 aluminum body, premium CrMo tool steel bits, and an anti-corrosion finish backed by our Rust-Free Guarantee.
Park Tool introduced the bicycle world to the 3-way hex wrench set over 30 years ago. Our 3-way wrenches fit perfectly in the palm of the hand and provide excellent leverage, making them a favorite of countless shop mechanics worldwide. AWS-1 FEATURES - 4mm, 5mm, and 6mm hex set - Wrenches made from industrial tool steel, through hardened and tempered for long life - Chamfered tips for a perfect fit
Park Tool introduced the bicycle world to the 3-way hex wrench set over 30 years ago. Our 3-way wrenches fit perfectly in the palm of the hand and provide excellent leverage, making them a favorite of countless shop mechanics worldwide. AWS-3 FEATURES - 2mm, 2.5mm, and 3mm hex set - Wrenches made from industrial tool steel, through hardened and tempered for long life - Chamfered tips for a perfect fit
Shop-quality, adjustable torque driver that limits torque applied to fasteners, preventing over-tightening and damage to lightweight components. The ATD-1.2 features all-metal internal construction with a comfortable, ergonomic composite molded grip. Each tool is assembled and calibrated at Park Tool's factory in Minnesota.
Bio ChainBrite Bicycle Chain and Component Cleaning Fluid is a 100% biodegradable, natural, plant-based degreaser formulated for use in Park's CM-5.2 Cyclone Chain Scrubber or as a general purpose degreaser. It won't harm alloy, plastic, or rubber parts. Use CB-4 full strength, do not dilute with water. Cover parts in solvent and scrub using a brush. 16-ounce bottle
Cleans bicycle chain quickly, easily, and effectively — without the hassle and mess of removing the chain from the bike. The Cyclone uses a large solvent reservoir, hundreds of rotating bristles, and a two-step cleaning process to get chains really clean, improve shifting performance, and extend the life of the chain and other expensive drivetrain parts. - Works with all multi-speed bikes (5, 6, 7, 8, 9, 10, 11, and 12-speed) as well as some single-speed models and e-bikes - Strong magnet at the bottom of the fluid reservoir holds metallic particles scrubbed from the chain - Special wicking sponge draws solvent from the chain as it exits, minimizing drips and mess - Sturdy handle makes the Cyclone easy to use and control - Holds 2 fluid ounces (59ml) of solvent
A professional quality shop chain tool that works on 5-speed to 12-speed Road and Mountain Bike derailleur chains*, including SRAM AXS 12 speed, as well as 1/8-inch and 3/16-inch chains. The CT-3.3 features an adjustable locating shelf so it works on any width chain to remove and install chain rivets. Built to last and easy to use, the CT-3.3 features a comfortable handle, investment cast steel body and replaceable driving pin (#CTP). *The CT-3.3 will install, but not peen, Campagnolo 11 and 12-speed chain rivets. - Comfortable T-handle - Replaceable driving pin (CTP) - Investment cast steel body - Adjustable locating shelf
Heat-treated alloy tool steel, one inch base fits wrench or bench vise. Thin-wall construction allows use without removal of cones and locknuts. The FR-5 has 12 splines that are approximately 23.4mm across. - Fits Shimano, SRAM, Sunrace, Suntour, Chris King and other cassette lockrings - Fits the SRAM XX1 11-speed cassettes - Also fits Shimano disc brake lockrings - Always use a quick-release skewer to hold the tool in place and snug to cogs when loosening; for solid axles, use the axle nut
A fast and convenient tool to remove and install 12-spline Shimano/SRAM style cassette lockrings, as well as similar lockrings on rotor discs. The FR-5H features a modified FR-5 tool that allows use without removing most quick release skewer nuts. The removable, threaded steel handle makes it possible to replace a worn or damaged head. - Fits Shimano, SRAM (including 1x), SunRace, SunTour, Chris King and other cassette lockrings - Also fits some Shimano disc brake lockrings
Park's Chainring Nut Wrench makes chainring bolt installation and removal easy. It securely holds the slotted nut to prevent spinning when tightening or loosening the bolt. And, it's double-ended to fit most slotted-type nuts, including Campagnolo chainring bolt nuts.
The use of cutting oil or fluid is extremely important when performing any cutting, tapping, facing or reaming operation and Park's Cutting Fluid is a high quality, environmentally safe cutting fluid that extends tool life and makes any frame prep job easier and safer. CF-2 can effectively be used on all metals.
The Park FR-2 Freewheel Remover fits SunTour two-notch freewheels. It's built thin so that removing axle parts is unnecessary. And, it's constructed of durable heat-treated steel. (Not recommended for use with SunTour 4- and 6-notch freewheels.)
Forged and machined, the ZP-5 is ideal for closely cutting zip ties and many other materials in tight spaces.
Park's Four-Sided Spoke Wrenches grip 4 sides of the spoke nipple so they offer an excellent grip and won't slip or round nipples when turning even the tightest spokes and/or aluminum nipples. These popular wrenches also have easy-to-hold vinyl-coated loop handles that are color-coded according to spoke size for easy identification. The loop handle makes them easy to hang on your tool board too.
Park's Gear Clean Brush has a handle on one end with a curved, serrated edge perfect for cleaning between cassette cogs. The other end's tough nylon bristles are ideal for cleaning the derailleurs, chain and other drivetrain parts to keep them clean and prevent premature wear. It also works great on brakes and other components that collect dirt and grime. The GearClean easily fits in a toolbox or pack.
The HBH-3 securely holds handlebars in place on any bike in any position while in a repair stand. It's useful for brake bleeding, cable and housing routing, lever adjustment, or any scenario where you want to prevent the handlebars from rotating, including storage or working with the bike rotated upwards. With its articulating clamps and adjustable straps, the HBH-3 can easily be attached in a wide variety of positions onto almost any handlebar, seatpost, frame, fork, or repair stand. Anodized aluminum construction with soft rubber straps. - Straps install onto any round tube from 12mm to 60mm (0.5" to 2.4"), as well as most irregular and aero-shaped tubing found on bicycles - Rotating articulating clamps allow for secure installation onto virtually any bicycle in a wide range of positions - Usable extension length of 18" to 32" (45cm to 81cm) - Collapses and folds to 17" (43cm) for storage
Park's Home Mechanic Pedal Wrench is great for your home workshop and event tool box. This top-quality 15mm pedal wrench provides the leverage you need to remove stubborn pedals. It's made to last from heat-treated steel, and the handle has a vinyl grip for comfort.
Designed and built to remove and install the lockring that retains front chainrings found on Shimano STEPS e-bike motors. - Fits Shimano STEPS E6100, E7000, E8000 and E9000 e-bike motor systems - For lockrings with 54mm outside diameter and 16 notches - Replacement for Shimano TL-FC39 tool - 36mm hex drive to be used with Park Tool TWB-36 Crow Foot and a torque wrench to properly measure torque - Constructed of 4140 heat-treated steel and plated for long life
Many chains use a master link that allows the chain to be installed and removed by hand. While master links don't require traditional chain tools, over time, dirt and corrosion can make it difficult to separate them by hand. Park's Master Link Pliers make removing and installing these master links quick and easy. Simply insert the specially sized jaws into the link and squeeze the vinyl-coated handles!
Park's Mini Chain Brute Chain Tool goes anywhere and features a V-shaped handle, a super-strong replaceable pin, and fine threads to make chain removal and installation a breeze. The CT-5 works on any derailleur chain, including Shimano Hyperglide and 9-, 10-, and 11-speed. It works for loosening tight links, too.
Choose the perfect tool for the job with Park's P-Handled Hex Wrenches. These top-shelf Allen wrenches come with offset handles made from durable nylon in a comfortable, ergonomic design. They are made of chrome vanadium for exceptional durability. The long shafts feature Bondhus heads for accessing hard-to-reach bolts and the short ends are chamfered for extra grip and high-torque applications.
A must-have tool for any rider or mechanic who services hydraulic brakes. The PS-1 Pad Spreader features a tapered edge designed to drive apart and reset hydraulic bicycle brake pads that may have been accidentally engaged. The head of the PS-1 mimics a section of disc brake rotor, with strong stainless steel construction and a long, vinyl-dipped handle for leverage and comfort. The PS-1 can also be used as a temporary stand-in for the rotor when testing or servicing the hydraulic system, negating the need to repeatedly remove and install the wheel. - Thickness: 1.95 mm - Length: 162 mm (6.4")
Park's PolyLube is specifically formulated to protect bearing components. Its Polyurea grease has extremely high shear strength to protect bottom brackets, headsets, pedals and hubs. Use it on threads, seatposts, stems and cables, too. It's also safe for fork seals, and repels water.
A daily-use, shop version of Park Tool's world-famous CM-5.2 Chain Scrubber. The CM-25 features a super-tough die-cast aluminum case and handle, plus a unique brush/sponge replacement cartridge that makes it easy to keep it running smoothly and working properly. Park Tool's proven four-sided scrubbing action makes thoroughly cleaning chains quick and easy. A shop quality cleaner built to give years of constant use. - Proven chain scrubbing technology leaves chains sparkling clean - Durable A380 aluminum die cast case and removable handle - Dual-sided sponges and wicking pads to help reduce drips - Rotating brushes clean on all four sides of every link - Brush and sponge cartridge quickly and easily clicks in and out (RBS-25) - Locking cover with stainless steel hinge pins - Choose drip or immersion fluid application methods - 100% serviceable
Park's Cone Wrenches are made of durable tool steel and are nice and thin to fit on the small-clearance cones found on hubs and other bearing assemblies. Plus, they work as regular wrenches, too. They feature Park's special Y heads that put more material where it's needed for excellent durability and strength. Most applications require at least 2 cone wrenches. If you have questions please contact us and we can recommend the correct sizes for your needs.
$8.49 - $10.95
Park's professional-quality, precision-sized spoke wrenches are hardened and chrome plated for long service. Wrenches are vinyl coated in one of four colors indicating the size at a glance. You will find these wrenches in virtually every professional bike shop and every shop mechanic's personal tool stash. Make sure you have the sizes you need in your home toolbox and bike bag.
This handy shop aid is ideal for sizing spokes, ball bearings, and crank cotters. To use, just hang the head of the spoke in the oblong hole and read its length on the scale. For crank cotters and ball bearings it works just like a gauge for drill bits. • Has both metric and fractional spoke length markings • Anodized aluminum with embossed markings to allow easy reading and long life
$14.95 - $20.95
Professional quality T-Handle star-shaped wrench built for speed, efficiency, leverage and a perfect fit. - Carefully selected combination of Chrome Vanadium and S-2 tool steels - Unique anodized aluminum Speed Spinner makes running long bolts in and out quick and effortless - Sliding T-handle creates increased leverage and multiple access positions
Designed and built specifically for a wide variety of bicycle Torx compatible work, the THT-1 is a set of eight common sizes of professional quality T-Handle star-shaped wrenches built for speed, efficiency, leverage and a perfect fit. Soon to become your favorite Torx compatible set, the THT-1 includes a handy tool holder that mounts to any vertical surface, including pegboard and solid surfaces (fasteners not included). - Carefully selected combination of Chrome Vanadium and S-2 tool steels - T6, T8, T10, T15, T20, T25, T30 and T40 Torx compatible wrenches included - Unique anodized aluminum Speed Spinner makes running long bolts in and out quick and effortless - Sliding T-handle creates increased leverage and multiple access positions - Tool holder is included with the set and mounts to any wall, bench or tool box, perfectly positioning each wrench for easy access and storage
Page 1 of 27 Next page