Workstands

$416.99 - $470.99
- The bike repair stand is the basic working tool both for service workshops and cycling enthusiasts
- Maximum load capacity is 30kg
- Weight of the stand without tool tray is 5.7kg

$415.99
Perfect for the mechanic on the go! Our Bike Gator portable bike repair stand folds down small for easy transport and is easy to assemble once you're at the venue. We offer it with the same clamps as our shop-based Pro model stands, so no matter your preference there's a stand for you. Despite its low weight at 5.7kg it has a capacity of 30kg, so even those of you working on downhill bikes or tandems can make use of this bike stand.
- The bike repair stand is the basic working tool both for service workshops and cycling enthusiasts
- Maximum load capacity is 30kg
- Weight of the stand without tool tray is 5.7kg

$436.99 - $502.99
- The bike repair stand is the basic working tool both for service workshops and cycling enthusiasts
- Maximum load capacity is 30kg
- Weight of the stand without tool tray is 5.7kg
- The stand features a new array of precision aluminum and steel parts which offer stiffness and durability
- NEW Jaw mount and rotation system
- Stand is adjustable by height between 980 and 1500mm

$2,481.99
- Electric repair stand is not just powerful, but also smart. It features endless height adjust, but it can also lift or descend a bike automatically with a push of a button. It also stops on its own when bike reaches the ground.
- Endless height adjust, travel adjust limiters, internal routed cables
- Equipped with Master shop repair clamp 1693.1M
- Secures directly to the floor or on a heavy-duty metal fixed plate
- Measurement: W750xL750xH2072 mm
- Weight: 106 kg (with a steel fixed plate)
- Load capacity: 400N (40kg)

$29.95
Topeak's sleek FlashStand FAT is a super parking/display stand that folds up for pocket-sized portability. This affordable, lightweight wonder securely holds your mountain bike by the non-drive side crankarm to keep it upright and safe. Take it along in your jersey pocket for those quick pit stops, too!

$84.95
$87.95
3% Off
Designed for bikes with hollow spindle cranksets. Lift the rear wheel to mount bike on the tune-up stand in seconds for washing, display, storage and maintenance.
- CLAMP HEAD: hollow spindle drive side crank
- ADD FEATURE: Quick tool-free assembly
- MATERIAL: Aluminum / Engineering grade polymer / Steel
- MAX WEIGHT CAPACITY: 18 kg / 39.7 lb
- COMPATIBILITY: Bike with hollow spindle cranksets (more than 20 mm)
- SIZE (folded): 40 x 40 x 8 cm / 15.7” x 15.7” x 3.1”
- SIZE (open): 40.5 x 39.5 x 38 cm / 15.9” x 15.6” x 15”
- 1.8 kg / 3.97 lb

$109.95
Topeak's LineUp Stand securely holds your bike by the rear wheel for storage or display. Its spring-loaded arm automatically adjusts to fit wheels from 20-inches to 29-inches in diameter. Use it at home to store your bike, or use it to hold your pit bike at your next cross race!

$339.95
A pro-level work stand with a built-in closable small parts bin. Stable tripod design folds down small for travel or use at the races. Additional clamp lever for tightening/releasing the clamp with ease.
Clamp Head: Non-marring rubber jaws, 360° rotation
Clamp Height: 107cm to 178cm (42" – 70")
Clamp Opening: 1.9cm to 4.5cm (0.75" – 1.8")
Folding: Two QR clamps
Base: HD folding 6061 T6 tubes
Max Weight Capacity: 25kg / 55lb
Added Features: Carry bag, Rubber base feet, Clamp lever, Closable small parts bin
Size: 17.8 x 117cm / 7.0" x 46.0" (Folded); 135cm / 53.1" (Base Diameter)
Weight: 6kg / 13.23lb

$429.95
A pro level workstand with a built-in digital weight scale. Stable tripod design folds down small for travel or use at the races. Additional clamp lever for tightening / releasing the clamp with ease.
Clamp Head Non-marring rubber jaws
360° rotation
Digital weight scale
Clamp Height 122 cm to 183 cm
(48” - 72”)
Clamp Opening 1.9 cm to 4.5 cm
(0.75” - 1.8”)

$179.99
- Clamp can be positioned at 5 directions.
- Adjustable in height, 105 - 150 cm.
- Max load: 50 kg

$219.99
- Clamp can be adjustable height from 106 to 144 cm.
- No tools required to set up for bike maintenance or fold for storage.
- Made of aluminum for lightweight.
- Weight: 6.18 kg.
- Max load: 35 kg.
- Tools are not included.

$129.99
- Designed to be easily mounted to post, wall, bench and flat surface.
- Adjustable linkage clamp allows the bike positioned at any angle.
- Max load: 30 kg.

$269.99
Features:
- Velcro fastener secures frame to bottom bracket cradle.
- Plastic bottom bracket cradle won’t harm bike’s finish.
- Carry bag, tool tray and wheel hook are included.
- Very easy to open, stable tripod base folds for storage.
- Ideal for heavy-duty work.

$259.99
- Professional quality folding repair stand
- Telescoping center pole and folding base make it easy to transport and store
- 360-degree clamp rotation with quick release lever
- Includes: Work Tray

$14.95
Park Tool's 106-AC easily adapts the #106 Work Tray or PTH-1 Paper Towel Holder to fit 35mm-37mm upright tubes on PCS-9 Repair Stands, as well as 2003 and newer PCS-1, PCS-4, PCS-4-1, PCS-4-2 Repair Stands.

$305.39
Park's adjustable linkage shop clamp is found in more shops than any other professional level clamp. The 100-5C features solid cast aluminum construction and durable replaceable clamp covers. Clamp has reliefs on both jaws for cable routing, and feature replaceable jaw covers.
- Fits PCS-4, PRS-5, PRS-6, and PRS-7 stands made after 6/96
- Fits bike frame tubes from 1" to 1 5/8" (25mm to 41mm)
- The clamp jaws are nominally 4 inches (10cm) wide
- Uses 468B jaw covers

$209.52
Park's adjustable linkage shop clamp is found in more shops than any other professional level clamp. The 100-9C features solid cast aluminum construction and durable replaceable clamp covers. Clamp has reliefs on both jaws for cable routing.
- Fits PRS-6, PRS-7, and PRS-8 stands made before 6/96
- Fits bike frame tubes from 1" to 1-5/8" (25mm to 41mm)
- The clamp jaws are nominally 4 inches (10cm) wide
- Uses 468B jaw covers

$280.39
Park's adjustable linkage shop clamp is found in more shops than any other professional level clamp. The 100-3C features solid cast aluminum construction and durable replaceable clamp covers. Clamp has reliefs on both jaws for cable routing.
- Fits all generations of PRS-2, PRS-3, and PRS-4 stands, and PRS-5 stands manufactured before 6/96
- Fits bike frame tubes from 1" to 1-5/8" (25mm to 41mm)
- The clamp jaws are nominally 4 inches (10cm) wide
- Uses 468B jaw covers

$199.95
Park's Bench-Mount Repair Stand easily bolts to any workbench and includes Park's shop-quality Micro-Adjust Clamp that handles round and aero seatposts and frames from 7/8-inch to 3-inches in diameter and clamps securely with its quick-release cam and handle that fine-tunes the tension. The clamp also has protective rubber jaws and built-in slots for cables. Plus its jaws are only 2.7 inches tall so they easily fit in narrow areas like on seatposts that aren't raised much. This stand rotates 360 degrees for optimum bike positioning, too.

$269.95
Park's Bench-Mount Repair Stand easily bolts to any workbench and includes Park's shop-quality solid cast-aluminum Adjustable-Linkage Clamp that boasts durable, protective and replaceable vinyl jaw covers. The clamp holds seatposts and frames from an inch to 1 5/8 inches in diameter and there are slots for cables, too. Plus, this stand rotates 360 degrees for optimum bike positioning.

$73.99
Park's Cast Aluminum Tool Tray attaches easily to most of Park's repair stands (sold separately) to keep your tools, lubes and small parts close at hand. It has deep sides so your small items stay put, a holder for cans of lube and slots for holding your tools. This handy tool fits Park's PRS-2, PRS-3, PRS-6, PRS-13, PCS-1, PCS-1 and PCS-4 repair stands manufactured after June 1996 (stands sold separately).

$419.95
The PRS-4.2 is a professional quality bench mount repair stand designed and built to withstand the rigors of everyday shop use. Includes three mounting holes, making it possible to clamp as high as 16.25" (41cm) from the bench surface.
- Shop quality 100-3C Clamp quickly adjusts to fit any frame tube up to 1-5/8" (41mm)
- The clamp jaws are nominally 4 inches (10cm) wide
- Clamping height can be raised from 6.5" to 16.25" (92cm to 41cm) above the bench surface
- Clamp rotates 360 degrees
- Heavy gauge steel tubing
- Chrome plated for durability

$389.95
The PRS-4.2 is a professional quality bench mount repair stand designed and built to withstand the rigors of everyday shop use. Includes three mounting holes, making it possible to clamp as high as 16.25" (41cm) from the bench surface.
- The 100-3D Micro-Adjust clamp grips nearly any tube from 7/8" to 3" (23mm to 76mm), including aero tubes
- The clamp jaws are nominally 2.75 inches (7cm) wide
- Clamping height can be raised from 6.5" to 16.25" (16cm to 41cm) above the bench surface
- Clamp rotates 360 degrees
- Heavy gauge steel tubing
- Chrome plated for durability

$399.95
Park's Deluxe Home Mechanic Repair Stand is an awesome portable stand that's as useful while traveling as it is at home. This versatile stand features Park's shop-quality Micro-Adjust Clamp that handles round and aero seatposts and frames from 7/8-inch to 3-inches in diameter and clamps securely with its quick-release cam and handle that fine-tunes the tension. The clamp also has protective rubber jaws and built-in slots for cables. Plus its jaws are only 2.7 inches tall so they easily fit in narrow areas, like on seatposts that aren't raised much. The Deluxe Stand also boasts a stable base and the top telescopes for putting the bicycle right where you need it to get your work done efficiently. Plus, you can also rotate bicycles 360 degrees and the stand folds for easy carrying and storage.

$469.95
Park Tool's Deluxe Home Mechanic Repair Stand is a heavy-duty folding stand with your choice of shop quality clamps. Perfect for heavier duty home use or portable shop use, the PCS-4 features a rock-solid, four-point leg system that folds together for storage, steel powder-coated tubing, and a composite horizontal tube.
• PCS-4-1 uses the 100-5C Adjustable Linkage Clamp.
• Clamp rotates 360º and is adjustable in height up to 67” (170cm)
• Adjusts quickly from 55" to 72"
• Approximate weight 26 lbs (11.8 kg)
NOTE: The maximum weight holding capacity of the PCS-4 is 45 kg (100 lb.). However, this assumes the weight is centered over the legs.

$307.95
The Deluxe Wall-Mount Repair Stand easily mounts to any post or wall stud. This shop-quality stand places the bike approximately 14.5 inches from the wall, so you'll have plenty of work space. The awesome clamp is Park's Adjustable Linkage model, which feature's replaceable rubber jaws; fits seatposts and frame tubes from 1 to 1 5/8-inch diameter; includes recesses for cable housing and rotates 360 degrees for optimum bike positioning. This great stand lets you work on your bikes just like a pro and is built to last.

$279.95
The Deluxe Wall-Mount Repair Stand easily mounts to any post or wall stud. This shop-quality stand places the bike approximately 14.5 inches from the wall, so you'll have plenty of work space. The awesome clamp is Park's Professional Micro-Adjust model, which features replaceable rubber jaws; fits seatposts and frame tubes from 7/8 to 3-inch diameter; includes recesses for cable housing and rotates 360 degrees for optimum bike positioning. This great stand lets you work on your bikes just like a pro and is built to last.

$35.95
Permanently and securely attach your Park Tool Repair Stand (sold separately) to the floor of your shop with Park's Floor Mounting Plate. Made with an 8" square of steel, it attaches to the stand with four bolts, which are included.

$257.79
Mount the THS-1 Trailhead Workstation (sold separately) directly to this rigid steel post.
Features:
- 2-inch (5cm) square post plated then powder coated for long outdoor life
- Includes THS-1 mounting fasteners
- 6-inch (15cm) square base with holes to mount directly into hard surface or to Park Tool #130 Base Plate (fasteners not included)
- Height: 62.25-inch (158cm) positioning cradle arms at 50.5-inch (128cm)
Page 1 of 3
Next page