Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands

Workstands

$1,209.39
The standard of the bike industry for over 40 years, the PRS-2.3 clamps two bikes and rotates horizontally 360 degrees, allowing one bike to be swung out of the way to work on another. Stand height and clamp position are firmly secured in place using our proven lock block system. Built from heavy-gauge oversized steel tubing, then chrome plated and powder coated for years of carefree use. The PRS-2.3-1 features our 100-3C Adjustable Linkage Clamps, with a time-tested design and straightforward operation. - Maximum weight capacity: 120 lbs. (54 kg) - Clamp capacity: 0.875" to 1.625" (22–41 mm) diameter tubes - Clamp jaws are nominally 4" (100 mm) wide - Clamp height: adjustable from 50" to 62" (128–158 cm) - Includes #105 Cast Aluminum Work Tray & RPP-1 Repair Stand Post Protector - Can be installed onto the #135 Repair Stand Base or bolted directly to the floor using the FP-2 Floor Plate (both sold separately)
$1,142.79
- The PRS-2.3.1 is a professional quality double arm repair stand designed and built to withstand the rigors of everyday shop use. - Includes two 100-3D Micro Adjust Clamps (clamps tubes up to 3", fully adjustable clamping pressure, narrow 2.7" clamping jaws) - Clamps two bikes simultaneously - Clamps rotate 360 degrees horizontally and vertically - Heavy gauge, chrome plated steel tubing for rigidity and years of trouble free use - Clamping height easily adjusts from 50" to 62" (128cm to 158cm) using heavy duty lock block and locking pin system - Includes aluminum work tray - #135 Steel Base Plate sold separately - Use FP-2 Floor Mounting Plate to mount stand directly to floor (sold separately)
$429.95
The PRS-26 incorporates proven features from our other Team Issue stands to produce a strong, lightweight repair stand that's at home on-the-go or in the race pits. The sturdy tripod leg design folds and unfolds quickly and easily, and provides stability on any surface. The clamp is height-adjustable from 97 to 147 cm (38" to 58"), and can be positioned over one leg or between two legs to accommodate any bike. Precisely constructed from anodized 6063 T6 lightweight aluminum and durable composites, the PRS-26 is our lightest full-featured repair stand, and folds compactly for storage or transport. The PRS-26 is equipped with the time-tested 100-25D Micro-Adjust Clamp, the same design featured on our shop repair stands. The 100-25D features narrow clamping jaws to fit into tight areas or on short seat posts, and clamps nearly any tube from 23 to 76 mm (7/8" to 3"), including aero tubes and dropper posts. The cam-actuated adjustment system allows for quick entry, adjustment and exit. - Maximum weight capacity*: 36 kg (80 lbs.) - Clamp capacity: round and aero tubes from 22 to 76 mm (7/8" to 3") wide - Jaw width: 70 mm (2.75") - Height adjustable from 97 to 147 cm (38" to 58") - Base when open forms a triangle of 126 x 126 x 126 cm (49.6" x 49.6" x 49.6") - Weight: 5.7 kg (12.6 lbs.) - The PRS-26 uses the 100-25D Micro-Adjust Clamp - Replaceable jaw covers (part #1960) *NOTE: The maximum weight capacity of the PRS-26 assumes the bike's center of gravity is positioned directly below the clamp.
$669.95
- 150lb holding capacity - Includes work tray (#105) (900119-01) - Base not included (900706)
$634.95
Built to withstand the rigors of every day shop use, the PRS-3.3 is the stand of choice for professional mechanics around the world. Stand height and clamp position are firmly secured in place using our proven lock block system. Built from heavy-gauge oversized steel tubing, then chrome plated and powder coated for years of carefree use. The PRS-3.3-2 features our 100-3D Micro-Adjust Clamp with narrow clamping jaws and a dual-stage, cam-actuated system that quickly adjusts to accommodate nearly any seat tube or frame size. - Maximum weight capacity: 120 lbs. (54 kg) - Clamp capacity: 0.875" to 3" (22–76 mm) diameter tubes, including aero tubes - Clamp jaws are nominally 2.75" (70 mm) wide - Clamp height: adjustable from 50" to 62" (128–158 cm) - Includes #105 Cast Aluminum Work Tray & RPP-1 Repair Stand Post Protector - Can be installed onto the #130 Repair Stand Base or bolted directly to the floor using the FP-2 Floor Plate (both sold separately)
$88.99
Includes a new tray/motor shroud, USB ports and oversized buttons to upgrade a Park Tool PRS-33 or PRS-33 AOK into the PRS-33.2 version controls and electronics.
$193.10
A versatile and convenient way to keep tools, supplies and technology at arms length on a PRS-33 Power Lift Repair Stand. The PRS-33TT solidly mounts directly to either side of the stand’s upright at any height. - 19 tool holding holes, slots and small trays in a variety of shapes and sizes - 14-inch (35cm) magnetic tool bar - Integrated mounting holes for PTH-1 Paper Towel Holder - Phone/tablet/clipboard holder - Pen and pencil holders - Adjustable utility hook to hang wheels, parts and scales - Height adjustable - Can be installed on a fully assembled stand
$14.95
Park's Paper-Towel Holder is an accessory for Park's Professional Race Stand (sold separately). It attaches easily and holds a standard roll of paper towels. It also works great for hanging clothes, wheels and tires.
$50.95
For wheels to perform properly, it's important that the rims be centered over the hubs. To check this, and to make precision adjustments, Park's Portable Wheel Dishing Tool is a must. It disassembles quickly for storage or travel and allows you to easily check centering on road, mountain and BMX wheels from 24 to 29 inches in diameter and it works with any hub. The Wheel Alignment Gauge is a necessity for every wheelbuilder.
$249.95
Perfect for taking to races and rides, the Portable Workbench is a bench that folds for easy transport and storage. It features a large work surface with specially sized slots, holes, and recesses and for holding tools, shop towels, lubes, beverages, etc. The folding steel legs provide a solid base for a toolbox and supplies, too.
$169.99 - $256.59
After years of research and testing, Park Tool's built what they consider the best shop clamp made. It’s smooth, versatile and built to stand up to everyday shop use. • #100-3D fits the following repair stands: PRS-2, PRS-2 OS, PRS-2 OS-1, PRS-2 OS-2, PRS-3, PRS-3 OS, PRS-3 OS-1, PRS-3 OS-2, PRS-3.2-1, PRS-3.2-2, PRS-4, PRS-4 OS, PRS-4 OS-1, PRS-4OS-2, PRS-4W and PRS-33 • #100-5D fits PCS-4, PRS-7, some models of PRS-5 (with composite top tubes), and PCS-1 models manufacturer post 2002. (Note: Inspect top tube below lever for an embossed "939") • #100-25D fits PRS-25, PCS-10, PCS-11, PCS-12 (and PRS-15 with 1951-15 Adaptor Stud) • Grips nearly any tube from 7/8” to 3” (23–76mm), including aero tubes • Micro-adjustability allows perfect clamping pressure every time and prevents damage to thin-walled tubes • Long travel cam handle allows quick entry, adjustment and exit • Versatile: It grips nearly any tube including aero shaped tubing and seat posts 7/8” to 3” (23mm-76mm). Its narrow clamping jaws (2.7”/7cm) are designed to clamp securely yet fit into tight areas or on short seat posts. • Durable, replaceable jaw covers • Soft Touch saddle cradle provides a perfect spot to temporarily rest a bike by its saddle • Built to last: Powder coated, precision machined, die-cast aluminum main body parts and high quality small parts • Fast operation: Cam-actuated adjustment system for quick entry, adjustment and exit, plus handy “spinner” handle helps speed large size range adjustments
$399.95
Walk into the service area of any bike shop in the world, and odds are good you'll see a Park Tool Professional Wheel Truing Stand on the bench still the top choice of professional mechanics everywhere for over 40 years, and for good reason. With extra-tall uprights and wide calipers, the TS-2.3 is capable of accepting most wheels commonly found on road, mountain, BMX, and hybrid bicycles, including wheels with disc brakes, aero rims, and oversized MTB tires. Upright adjustment is controlled with an ergonomically-designed speed knob, which quickly adjusts the stand to accommodate any hub width in seconds. The sturdy uprights of the TS-2.3 feature integrated storage for the included thru-axle adapters, which allow for compatibility with thru-axle, quick release, and solid axle hubs without the use of additional parts or adapters. The TS-2.3 is constructed from durable powder-coated heavy-gauge steel and is manufactured, assembled, and calibrated in St. Paul, Minnesota. Strong, comfortable knobs and spring-loaded calipers and caliper arm ensure smooth, consistent operation, and the removable composite caliper tips protect painted rims and fragile materials. 100% adjustable and rebuildable for a lifetime of use. Wheel Capacity: - Maximum wheel size: Up to 29" + with or without tire - Maximum hub width: 200 mm (7.87") - Maximum rim width: 102 mm (4") - Hub compatibility: Accommodates quick release and solid axle hubs, also accommodates thru axle hubs using included TS-2TA.2 Thru Axle Adaptors Mounting Options: - Bolt to benchtop — mounting holes are 9.5 mm (3/8") in diameter and 200 mm (7.9") from center to center - Clamp in vise — base is 76 mm (3") deep - Install in TSB-2.2 Truing Stand Base
$19.95
The RPP-1 offers simple but effective protection for your service area. This 32" tall pad prevents damage to bikes caused by being leaned against or knocked over onto your Park Tool professional repair stand. Covered with an attractive Park Tool blue vinyl finish for easy wiping off of dirt and grease. - Compatible with Park Tool Shop Repair Stands with a 2" diameter lower post, including all generations of PRS-2 and PRS-3 - Easily removed and installed with hook-and-loop material
$41.99
Park Tool's Repair Kit features the most common replacement parts for the 100-3C and 100-5C clamps. Includes: • 118s adjusting barrel • 117s eyebolt • 121s adjusting barrel pivot • 136 nut • 116s cap screws (2) • 108s-2 pins (2) • 107s-2 pin (1) • Washers (3) • E-clips (3)
$267.95
Park Tool's 130 Repair Stand Base is designed for the PRS-3, PRS-3OSLB, PRS-3 OS-1, PRS-3 OS-2 and the PRS-23 LB Repair Stands (each sold separately). • 22-1/2" x 22-1/2" x 7/16" (57cm x 57cm by 1.1cm) steel plate • Approximately 68 lbs (31k) • Black painted
$560.19
Park Tool's Repair Stand Base is a steel base plate for the PRS-2 OSLB, PRS-2 OS-1, PRS-2 OS-2 Repair Stands (each sold separately). - 23" x 35" x 7/16" steel plate - Approximately 118 lbs - Black painted
$60.44
The PCS-EXT is an extension that adds up to 21 inches (53 cm) of adjustable working height to any PCS-1 or PCS-4 repair stand manufactured between June 1996 and December 2001. The kit includes a quick-release collar and extension tube to raise the working height of the stand. The PCS-EXT is required for use of the 106-AC Accessory Collar.
$9.14 - $27.99
Everyone wears out their Park Tool work stand clamp covers at some point. Find replacement covers for yours here. Each cover is constructed of soft, durable composite rubber. See below to determine which covers fit your Park Tool stand clamp: - 1002: fits 100-3X and 100-5X extreme range clamps - 1185: fits clamps on the repair stands PCS-9, PCS-10, PCS-11, and PCS-12 - 1259: fits 100-4X, 100-6X, 100-7X, and 100-15X clamps - 1960: fits 100-3D, 100-5D, and 100-25D Professional Micro Adjust Repair Stand Clamps - 468B: fits clamps with double cable reliefs, including 100-3C, 100-5C, 100-8C, 100-8Y, and 100-9C clamps - 467B: fits clamps with single cable relief, including PRS-2 through PRS-8 (for older-style clamps, non-current) - 468G: fits PCS-1 and PCS-2 clamps with double cable reliefs (clamp models: 100-1C, 100-1CA, and 100-2C) - 467G: fits PCS-1 and PCS-2 clamps with single cable relief (for older PCS-series stands only; not for current model stands) - 466: Rubber Replacement Clamp Cover Set (fits older clamps with plastic-dipped jaws)
$429.95
Tough, light, and loaded with features, that's Park's Team Issue Repair Stand. The 3-point leg system and adjustable height (up to 60 inches) creates a stable, ergonomic repair station for easy, efficient wrenching. And, Park's Professional Micro Adjust Clamp quickly clamps nearly any frame tube from 7/8 to 3 inches in diameter, including aero tubes. And the clamping force is fully adjustable for safety. Plus, the clamp has soft, durable rubber jaws that are narrow to fit on even short seatposts and tight areas on a bike. And, the clamp rotates 360 degrees for easy access to any part of the bike. Also, if you're in a hurry, there's a seat cradle for simply hanging your bike too. This great stand folds fast and small for easy transport and storage.
$419.95
Updated with a smoother, more solid rotation system! Originally designed for professional Pro Tour mechanics. The PRS-22.2 firmly holds any bike without clamping the frame or seat post by supporting the bottom bracket then locking either the front or rear dropouts. Works with any style axle system, including quick release and all sizes of thru-axles without cumbersome adaptors. Ideal for cleaning and general repair work, the PRS-22.2 features a solid tripod base and folds compactly for storage or transport. - Precisely constructed of anodized 6063 T6 lightweight aluminum and durable composites (12.5lbs, 5.67kg) - Adjustable BB height of 30" to 45" / 76cm to 114cm - 360 degree horizontal rotation allows easy access to all sides of the bike - Customizable bottom bracket supports accommodate a wide variety of BB shells - Main beam is adjustable fore and aft to customize balance points - Adjustable collar features receivers for optional accessories (sold separately) 106 Work Tray and PHT-1 Paper Towel Holder - Easily transported in the BAG-20 (sold separately)
$34.95
A 6-inch (15cm) extension that easily mounts to the main beam of any PRS-22 or PRS-22.2 to accommodate longer wheelbase bikes with bottom bracket-to-front axle lengths over 28.75 inches, including CX, gravel and enduro style bikes.
$13.95
Park Tool's Tool Tray Collar easily adapts the #106 Work Tray to fit the 41mm upright tube on 2011 and older PRS-20 and PRS-21 Repair Stands, as well as 1996 and newer PCS-1, PCS-4, PCS-4-1 and PCS-4-2 Repair Stands (each sold separately).
$25.95
The Travel and Storage Bag is a heavyweight nylon bag with a shoulder strap. This bag is designed for transporting and storing your Park Professional Race Stand. It makes travel easy and convenient, while also protecting your stand.
$25.95
The Travel and Storage Bag is a heavyweight nylon bag with a shoulder strap. This bag is designed for transporting and storing your Park Team Race Stand. It makes travel easy and convenient, while also protecting your stand.
$61.95
For wheels to perform properly, it's important that the rims be centered over the hubs. To check this, and to make precision adjustments, Park's Wheel Alignment Gauge (also called a dishing tool) is a must. It allows you to easily check centering on road, mountain and BMX wheels from 16 to 29 inches in diameter. It works with any hub width and its innovative design even allows it to be accurately used with the tire still on the wheel. The Wheel Alignment Gauge is a necessity for every wheelbuilder.
$18.95
Park's Work Tray attaches easily to most of Park's repair stands (sold separately) to keep your tools and small parts close at hand. It has deep sides so your small items stay put and many slots for holding your tools. The Tool Tray fits Park's PRS-2, PRS-3, PRS-6, PRS-11, PRS-12, PCS-1 and PCS-4 repair stands.
$44.95
Keep your most-needed bike repair tools and supplies close at hand with Park's Work Tray. It easily installs on your Park PRS-15, PRS-10, or PRS-11 Repair Stand (sold separately). And it features 2 separate compartments, a lube holder, a tool/towel bar, a tab system that holds plastic grocery bags and 2 receiver pods for extra accessories.
$89.99
The HMS-10 is a simple yet efficient stand for a day at the races or home mechanic use. Lightweight and affordable, this simple and compact stand will allow for crucial adjustments to be made to your drivetrain. - Install bike by inserting the seat post into the U-Shaped Pipe - Durable stand made of steel is ideal for race day or home mechanic use - Recommended for adjusting or maintaining drivetrain or the rear wheel - Rotating U-shaped hook corresponds to various seat angles - Formed urethane cover protects bike and seatpost finish
$174.99
The W-3100 with tool tray set is a great stand for either the shop or the home mechanic. Sturdy base allows for industrial use. - Heavy-duty steel maintenance stand for home mechanics with single lever clamping operation that can hold 65 mm tubing - Legs are foldable for storing in narrow space and 360° rotatable to keep the bike at best angle - Widely spanned legs for great stability - Clamp height is fixed at 55.5 inches from floor - Clamp jaw can be rotated to hold the bike in the best position
$98.00
For anyone who doesn’t want to be confined to parking lots or trailheads — adventurers, racers, and garage mechanics — Küat designed the Tri-Doc for you. Tri-Doc offers an affordable way to turn your NV 2.0 into a travel stand. Reliable tri-leg design creates a stable platform for needed tune-ups or repairs. Aluminum construction finished with polished anodizing pairs perfectly with your NV 2.0. - Portable telescoping design - Quick setup - Pairs with your NV 2.0 Trail Doc - Anodized finish reflects NV 2.0 - Rubber feet offer additional stability and protection