Brakes/Levers/Pads

- T100 Sintered Metallic: long-life, all-condition compound - T106 Semi Metallic: no-bed, shorter-life, quieter compound - Set includes one pair of pads with retention clip

- Hayes service parts for calipers - Rebuild kits include: (2) caliper pistons with square profile seals, transfer port o-ring, and caliper bleeder with cap

Prime Comp brakes feature tool-free reach adjust and a predictable, linear lever throw for better control across a variety of trails. - Leverage increases throughout the stroke, for better modulation and higher power at the end - Crosshairs Alignment system allows precise adjustment of caliper position - Improved tool-free reach adjustment providing a fixed mechanical advantage regardless of lever position

For use with 2000+ Hayes 74mm eye-to-eye calipers (adapters/calipers for 22mm mounts are no longer available) - (IS) International Standard 51mm tabs; (QR) Quick Release; (TA) thru-axle - Note: Fox-36/40 (thru-axle), Rock Shox Pike (Maxle), and Psylo (Tullio) axle forks use IS-QR adapters

- MC bodies are bare (no guts, reservoir, lever, etc.) - Stroker Series bodies come with bar clamp and bolts

Replacement master cylinder pivot pin for Hayes hydraulic disc levers

- T100 Sintered Metallic: long-life, all-condition compound - T106 Semi Metallic: no-bed, shorter-life, quieter compound - Set includes one pair of pads with retention clip

- Prime 2-piece rotors are for Prime Pro and Expert brakes only - L-series, lightweight one piece rotors - V-cut profile steel rotors for optimum weight-to-performance ratio. Increased surface area over previous designs increases power while cutouts and drillings help keep pads clean - Rotors includes: (1) 6-bolt/44mmBCD rotor, (1) Torx wrench, and (6) T-25 rotor mounting bolts with thread retaining compound - 205g @ 203mm

Complete replacement master cylinder assemblies for Hayes hydraulic disc brakes

Replacement lever blade for Hayes hydraulic disc levers - Includes Reach Adjuster

- MC bodies are bare (no guts, reservoir, lever, etc.) - Stroker Series bodies come with bar clamp and bolts

One piece forged aluminum caliper with machined window for reduced weight and better ventilation - Crosshairs alignment technology for precise setup - Road version for use with short-pull (STI/drop/canti) brake levers (sold separately) - Includes L-series rotor, cable and housing - Adapters sold separately

- HFX-9 kit includes a pre-crimped inline caliper fitting - Sole and Stroker Ryde kit includes specific fittings for lever and caliper

Replacement levers pivots pion kit for Hayes hydraulic disc levers

Externally fitting service parts for Hayes hydraulic disc brake master cylinder

- Prevents pads from becoming dislodged from pistons when transported without rotor inserted in caliper - Sold (10) per bag

MX-Comp brakes are powerful, low maintenance mechanical disc brakes for long pull brake levers. - Torsion Spring internals for low effort, more efficient braking - Body design and lever arm for improved stiffness and lower weight - New improved pads offer quiet braking with great performance - Ball and ramp actuation - Includes rotor

Kevlar reinforced (black) hydraulic tubing: DOT-3/4/5.1 compatible - Prime Series kits are for Prime Pro, and Prime Expert brakes only - Stroker Ace/Gram/Carbon/Trail and El Camino kit includes specific fittings for lever and caliper (not for Stroker Ryyd - HFX-Mag/G2 kit includes a pre-crimped inline caliper fitting and specific HFX-Mag lever attachment (can be used with older G1 caliper if angle warrants fit) - HFX-9 kit includes a pre-crimped inline caliper fitting with specific HFX-9 lever attachment - Sole and Stroker Ryde kit includes specific fittings for lever and caliper - Tubing parts that fit HFX-Mag also fit Original, DH, FR, and Comp systems

Bleed fittings specifically designed for Hayes hydraulic disc brakes.

Hayes Pro bleed kits include dual syringes and high quality fittings for precise, repeatable bleeds. D.O.T. Brake Fluid Dual Syringe Pro Bleed Kit - Includes 4oz of high performance Hayes DOT 4 brake fluid - Quick connect fittings and dual syringes for an efficient, precise bleed - Bleed fittings for Hayes DOT 4 brakes - Reusable plastic container with locking lid Venom Mineral Oil Dual Syringe Pro Bleed Kit - Includes 2oz of high performance Hayes Venom mineral oil - Quick connect fittings and dual syringes for an efficient, precise bleed - Bleed fittings for Hayes Venom mineral oil brakes - Reusable plastic container with locking lid

CX Expert mechanical discs offer reliable braking and easy setup compatible with short pull road brake levers. - Bottom load, semi-metallic pads offer durability in muddy and wet conditions - Forged aluminum construction - Single piston - Includes 140mm or 160mm L-series rotor

- MC bodies are bare (no guts, reservoir, lever, etc.) - Stroker Series bodies come with bar clamp and bolts

- MC bodies are bare (no guts, reservoir, lever, etc.) - Stroker Series bodies come with bar clamp and bolts

Hayes Radar disc brake mineral oil system - Crosshair disc brake adjustment system allows you to quickly and accurately align your calipers with a hex key set screw - Tooled reach adjust - 22mm caliper pistons - Split lever clamp for easy installation and removal

Replacement levers pivots pin kit for Hayes hydraulic disc levers

Internally fitting service parts for Hayes hydraulic disc brake master cylinders

- MC bodies are bare (no guts, reservoir, lever, etc.) - Stroker Series bodies come with bar clamp and bolts

- One piece forged body with cable adjusting barrel - Black anodized with laser etched graphics - Includes 160mm L-series rotor - Adapters sold separately - Weight does not include rotor or adapter - Caliper: 74mm - Rotor: 160mm - Weight: 195g

Replacement hydraulic brake caliper assembly for Hayes Dyno Comp and Sport brakes.

Complete replacement master cylinder assemblies for Hayes hydraulic disc brakes.