Forks

- Protective neoprene and velcro cut-To-Fit boot fits most rear shocks

Service kits include dust seals, foam rings, oil seals, air and damper o-rings needed for basic service.

- Clamps on to dual-Crown fork stanchions to prevent damage to frame - Easy to install and adjust, More secure and lower profile than stock bumpers - Molded loops allow clean and easy zip-Tie number plate mounting - Available for 35mm boxxer or 40mm fox stanchions, Sold in pairs

- Replacement leg guards for Dorado forks

Service your suspension fork with Enduro Seal KIts. - Custom made for each make and model of fork

- CNC machined aluminum rim brake adapter with 4-bolt clamps - Only for Identiti Rebate forks, not for use with any other product, bike, science project or garage creation - When mounting to fork legs, torque to 4.8 Nm

• Caliper brake mounts • 35mm rake • High-tensile steel construction • 1-inch steerer diameter • 185mm steerer length • Threaded fork • Compatible with 20-inch wheels

- Hi-tensile steel construction - Caliper brake mount - 35mm rake - Axle-to-Crown: 365mm - Race Diameter: 27mm - Axle: 3/8-inch - Thread Length: 120mm - Steerer Length: 200mm - Steerer Size: 1-inch

- Hi-tensile steel construction - Caliper brake mount - 35mm rake - Steerer Type: Threaded - Steerer Size: 1-inch - Steerer Length: 200mm - Brake Mount: Caliper - Axle-to-Crown: 395mm - Race Diameter: 27mm - Axle: 3/8-inch - Thread Length: 100mm

Economically priced hi-tensile steel MTB fork for 26-inch wheels. - Steerer Type: Threaded Steerer - Size: 1" (7/8 ID) - Steerer Length: 198mm - Rake: 45mm - Axle-to-Crown: 393mm - Race Diameter: 27mm - Axle: 3/8" - Thread Length: 95mm

- Hi-tensile steel construction - Caliper brake mount - 35mm rake - Steerer Type: Threaded - Steerer Size: 1-inch - Steerer Length: 137mm - Brake Mount: Caliper - Rake: 35mm - Axle-to-Crown: 315mm - Race Diameter: 27mm - Axle: 3/8-inch - Thread Length: 40mm

Get back on the road with a genuine replacement fork. The fork you need. - Original replacement fork for Electra Townie bikes - Color matched for direct compatibility

Get back on the road with a genuine replacement fork. The fork you need. - Original replacement fork for Electra Townie bikes - Color matched for direct compatibility

Get back on the road with a genuine replacement fork. The fork you need. - Original replacement fork - Color matched for direct compatibility

Get back on the road with a genuine replacement fork. The fork you need. - Original replacement fork for Electra Townie bikes - Color matched for direct compatibility

- Hi-tensile steel construction - Available with brake studs or without - 60mm rake - Type: Cruiser Size: 26" - Steerer Type: Threaded Steerer - Steerer Length: 250mm - Axle-to-Crown: 400mm - Axle: 3/8" - Thread Length: 125mm - O.L.D.: 100mm

- Brake mounts: Caliper - Construction: Hi-tensile steel - Rake: 50mm - Type: LW - Steerer type: Threaded - Race diameter: 27mm - Axle: 3/8'inch

• Cantilever brake mounts • High-tensile steel construction • Threaded fork • Steerer diameter: 1-inch • Steerer length: 180mm

• Cantilever brake mounts • High-tensile steel construction • Threaded fork • Steerer diameter: 1-inch • Steerer length: 200mm

• Cantilever brake mounts • High-tensile steel construction • Threaded fork • Steerer diameter: 1-inch • Steerer length: 200mm • For bikes with 26-inch wheels

• High-tensile steel construction • Threadless

- Cantilever brake mounts - High-tensile steel construction - Threadless fork - Steerer diameter: 1 1/8-inch - Steerer length: 260mm - For bikes with 26-inch wheels

Get back on the road with a genuine replacement fork. The fork you need. - Original replacement forks for Electra Cruiser 1 Step-Over 26" bikes - Color matched for direct compatibility

Genuine replacement parts Get back on the road with a genuine replacement fork. The fork you need. - Original replacement forks for Electra Cruiser 1 Step-Thru 24" bikes - Color matched for direct compatibility

Get back on the road with a genuine replacement fork. The fork you need. - Original replacement forks for Electra Cruiser 1 Step-Thru 26" bikes - Color matched for direct compatibility

Get back on the road with a genuine replacement fork. The fork you need. - Original replacement forks for Electra Cruiser 7D Step-Over 26" bikes - Color matched for direct compatibility

Get back on the road with a genuine replacement fork. The fork you need. - Original replacement forks for Electra Cruiser 7D Step-Thru 26" bikes - Color matched for direct compatibility

Get back on the road with a genuine replacement fork. The fork you need. - Original replacement fork for Electra Loft bikes - Color matched for direct compatibility - Full steel construction

- Cantilever brake mounts - 45mm rake - Hi-tensile steel construction - Steerer Type: Threaded - Steerer Size: 1-inch - Brake Mount: Cantilever - Rake: 45mm - Axle-to-Crown: 405mm - Thread Length: 120mm - Axle: QR 9mm

• Cantilever brake mounts • 45mm rake • High-tensile steel construction • Threaded fork