Filter By:
- Show More Brands
- Show Fewer Brands
- Show More Sizes
- Show Fewer Sizes
- Show More Model Years
- Show Fewer Model Years
Other
---2023-487125-3396898-1.png)
Service kit for 100 hr service (re-adjusting play and replacing wiper).
This Service Kit 1 only fits posts that have: "Wiper without spring"
There are three different service kits for the REVIVE/DIVINE 30.9/31.6, depending on model year and version. To determine the correct service kit for your post, please copy this link into your web browser:
https://www.bikeyoke.de/media/products/REVIVE%20service%20kit%20coding.pdf
Kit includes:
- 1x Wiper (no spring)
- 6x Glide pin
- 1x Lower bushing (grey, without line marking)
- 1x Foam ring
- 1x C-clip R12
---2023-487127-3396900-1.png)
Service kit for 100 hr service (re-adjusting play and replacing wiper).
There are three different service kits for the REVIVE/DIVINE 30.9/31.6, depending on model year and version.
To determine the correct service kit for your post, please copy this link into your web browser:
https://www.bikeyoke.de/media/products/REVIVE%20service%20kit%20coding.pdf
Kit includes:
- 1x Wiper (with spring)
- 6x Glide pin
- 1x Lower bushing (grey, with line marking)
- 1x Foam ring
- 1x C-clip R12
Valve-extension-adapter.
Allows easier access to your dropper valve for shock-pumps with short valve heads.
Give your Enduro MK3 stem a bit of extra bling and shave off a few grams at the same time.
Includes:
- 6x Enduro MK3 Stem Titanium bolts
These super tough axles are constructed to Fox's exact specifications and made from 7075 Aluminium.
Unlike any other fork axles on the market, these feature a unique double hex design. This includes the traditional 6mm that everyone is familiar with but with an added 8mm Allen key fitting as well. This feature makes removal much easier if the 6mm gets chewed up, over tightened or not removed for a long time.
Having an Allen key fitting instead of a QR also allows the use of a torque wrench so you can be sure your wheel is correctly tightened. This Axle also comes with a grade 5 titanium pinch bolt and backing nut to finish things off.
Clean, simple, and fast!
Replacement for Fox PN:
820-09-071-KIT / Service Set: 2021 36-38 15x110 KaboltX Pinch-axle Assembly
820-09-063-KIT / Service Set: 2020 FOX-Marzocchi 15x110 QR Adjust Axle Assembly
NOTE: This axle does not fit 2021+ 32 and 34. (Square Arch)
$0.60
Parts for repair and maintenance of DT Swiss hubs.
- DT Swiss 240s Shim Ring
$0.60
Parts for repair and maintenance of DT Swiss hubs.
- DT Swiss Shim Ring: for Star Ratchet Hubs with 26mm OD Driveside Bearings
$0.99
Internally fitting service parts for Hayes hydraulic disc brake master cylinders.
- All HFX-MAG compatible master cylinder internals are designed for the current aluminum piston/2mm push-rod platform (2003 and newer).
$0.99
Complete remotes and remote components for KS dropper posts.
$1.00
Replacement small parts for Hope disc brake Hope disc brake calipers.
$1.00
Looking to get a little extra distance so that your derailleur clears your 40 or 42 tooth cog? Look no further.
- M4 x 24mm screw for that extra little push
$1.20 - $36.00
- Allows quick chain removal without tools
- MissingLink 410HD|~|1sp|~|BMX Heavy Duty chain|~|9.4mm|~|each|~|
- MissingLink 410|~|1sp|~|BMX|~|8.6mm|~|each|~|
- MissingLink II|~|8sp|~|all|~|7.1mm|~|6/card|~|
- MissingLink-9|~|9sp|~|all|~|6.6mm|~|6/card|~|
- MissingLink-10R|~|10sp|~|KMC, Shimano, SRAM|~|5.9mm|~|6/card|~|
- MissingLink-10CR|~|10sp|~|Campagnolo only|~|5.9mm|~|6/card|~|
- MissingLink-11|~|11sp|~|Campy, KMC, Shimano|~|5.5mm|~|6/card|~|
$1.40
Replacement piston and seals for Hope disc brake calipers.
$1.50
KMC 3/16" Master Link Chain Links
- For 3/16" chain, extra wide
- Extra-wide, for non-derailleur bikes: BMX, cruisers, etc
- Perfectly fits on KMC 415H & 415H-NP chains
$1.65 - $2.20
- Half-link connector allows you to add or subtract half of one link (1/2 inch) from the chain in order to optimize chain tension
- Uses standard chain pin connector and tool
$1.79
Replace the top bearing in your YST8300 headset with these caged ball bearings.
$1.95
Replacement end plugs for the GA2, GA2 Fat, and GA3 grip models.
- One size.
- Sold as a pair.
- Fits Ergon GA2, GA2 Fat and GA3 models only.
- Designed to fit Trail / All-Mountain MTB handlebars on the market today.
$1.95
Replacement right and left Ergon logo bar plugs. Features the Ergon logo in a vibrant white color. You have the choice of a plug set of the barend and non-barend models
- Right and Left soft plastic bar plugs.
- Sold as a set only.
- Fits most handlebars.
- Can be trimmed to fit various handlebar thicknesses.
- Plug set for GP and GS grips with barends - fits GP2, GP3, GP4, GP5, GS2 and GS3 models only
- Plug set for GP1, GC1 and GS1 grips - fits GP1, GC1, and GS1 only
$1.99
HFX-Mag/-9, El Camino, Stroker Caliper-Hose Connection Seal
$1.99
Parts for the service of the seal and restore the smooth cycling of KS dropper posts.
$1.99
Saddle clamp heads and lowers for KS Dropper posts.
$1.99
M5 bolts to mount your flat mount caliper to the frame. Sold as a QTY of 2.
$2.00
FSA Mega Exo Small Parts.
$2.00
- Replacement retaining clip for the Surly Tuggnut/Snuggnut
$2.09
- Routes cables underneath the bottom bracket
- Will not rust or corrode
$2.19
- Model: Derailleur Bolt & Nut
- Compatibility: Mounts rear bracket to frame
$2.42
Parts for the service of the seal and restore the smooth cycling of KS dropper posts.
$2.50
The Gyro G3 upper top plate is designed for use with the G3 detangler.
$2.75
Use to create your desired chain length in single-speed applications. Only one half link is needed.
- Non-reusable
- Width: 9.4 mm
- Drivetrain Speeds: 1
- Color: Black
- Chain Compatibility: Shimano , SRAM , Campagnolo , Connex , KMC
$2.80
Replacement piston and seals for Hope disc brake calipers.
$2.80
Replacement piston and seals for Hope disc brake calipers.
$2.99
Air Spring Volume Reduction Kit
- Cane Creel Kitsuma Air 1250^3 Negative Volume Reducer
Page 1 of 37
Next page