Filter By:
- Show More Brands
- Show Fewer Brands
- Show More Sizes
- Show Fewer Sizes
Other

$3.95
The Tanpan ferrule converts standard Tanpans to Tanpan inlines.
- Coverts Tanpan into Tanpan Inline

$9.95
Wolf Tooth Headset Spacers for Trek Knock Block are machined in the USA out of aircraft grade aluminum.
- Compatible with Trek Knock Block system
- These spacers have unique raised features that key to Knock Block compatible stems (made by Bontrager)
- 1 1/8" top (straight 1 1/8" or 1 1/8" to 1 1/2" taper) steerer tubes only

$9.95
This stem cap is where your bike fashion sense and the weight weenie in you collide. This Ultralight and ultra-sleek stem cap integrates a 5mm, 10mm or 15mm headset spacer with your stem cap in finely machined piece. Why have extra steerer tube requiring spacers on top of your stem you ask? Well, many carbon steerers require that the steer tube extend above the stem. Also, riders may want the flexibility to move handlebar height up and down for different types of riding or for bike re-sale.
- Design and manufactured in Minneapolis, MN USA
- 1 1/8" top (straight 1 1/8" or 1 1/2" to 1 1/8" taper) steerer tubes only
- 6061-T6 aluminum
- 5mm internal cylinder wall height
- Black aluminum bolt included
Total weight (cap + bolt): 5mm= 12g. Compare to a standard flat stem cap and steel bolt at 20 grams + spacers add even more.

$17.95
Add some color and style to your bike build with Precision Headset Stack spacers. Offered in multiple sizes, made proudly in Minneapolis, MN, and laser marked with the stack size on each end, find your perfect fit.
- Designed and manufactured in the Minneapolis, MN USA
- Fits 1 1/8" steerers only
- Made from 6061-T6 Aluminum

$21.95
The RoadLink is a simple device that offsets the position of your Shimano road derailleur to make it possible to run a wide-range mountain bike style cassette. It is an ideal solution for riders looking to convert their road, gravel, cyclocross, or commuter.
- The RoadLink is optimized for use with ten or eleven-speed 11-36t and 11-40t cassettes
- 11-42 or 10-42 setups are not supported
- Works with all 10-11 speed Shimano and SRAM Road Derailleurs
- Best used with Single or Double Setups - see manufacturer's site for more details

$24.75
Add some color and style to your bike build with Precision Headset Stack spacers. Offered in multiple sizes, made proudly in Minneapolis, MN, and laser marked with the stack size on each end, find your perfect fit.
- Designed and manufactured in Minneapolis, MN USA
- Fits 1 1/8" steerers only
- Made from 6061-T6 Aluminum

$24.95
The Wolf Tooth Compression Plug provides an anchor point to set the headset preload on road, MTB, or gravel bikes with carbon forks—essentially securing everything on the steerer tube. A stem cap with a 5mm integrated spacer is included, which is important since many fork manufacturers require the steerer tube to extend above the top of the stem. It is available in multiple color options to add some style to your bike.
- Fits forks with 1 1/8" steerer tubes
- Designed for carbon steerer tubes but works with metal steerer tubes with ID from 23.5mm to 24.5mm
- 7075-T6 aluminum
- Never use a star nut on forks with carbon steerers

$24.95 - $29.95
Goatlinks are designed to optimize the derailleur's position relative to your cassette. Offered in two versions - a 10-speed and 11-speed, each is intended to improve the shifting of your 1x drivetrain.
- Optimized for using a Shimano XT 8000 or XTR 9000 Rear Derailleur with a 10-42, 10-44, 11-45, 11-46 rear cassette setup
- Compatible with M8000 (XT) and M9000 (XTR) series eleven-speed Shimano rear derailleurs
- Double chainrings are not currently supported
- Triple chainrings are not supported
- Direct Mount-native frames and SRAM derailleurs are not supported

$24.95
The precision-engineered Wolf Tooth Seatpost Clamp secures your seatpost and looks good doing it. At the heart of the Wolf Tooth Seatpost Clamp is a custom self-aligning bolt and anchor. The M5 bolt includes spherical washer and mates with a cylindrical anchor barrel. This means that threads are always perfectly aligned, preventing binding and ensuring consistent clamping force.
- M6 stainless steel bolt with integrated washer
Tool interface - 4mm hex key

$24.95
The precision-engineered Wolf Tooth Seatpost Clamp secures your seatpost and looks good doing it. At the heart of the Wolf Tooth Seatpost Clamp is a custom self-aligning bolt and anchor. The M5 bolt includes spherical washer and mates with a cylindrical anchor barrel. This means that threads are always perfectly aligned, preventing binding and ensuring consistent clamping force.
- M6 stainless steel bolt with integrated washer
- Tool interface - 4mm hex key

$24.95
Wolf Tooth ShiftMounts are adapter mounts that allow you to integrate SRAM and Shimano shifters with several different brakes from Shimano, SRAM, and more. Handlebar space is prime real estate and the ShiftMount seamlessly integrates brakes and shifters for a clean look.
- Designed to work with rear (right side) brakes and shifters
- Consult the brake and shifter manufacturers to understand which mounting interface you have on your brakes and shifters
- For handlebar clamp ShiftMounts tighten clamp bolt to 1-2 Nm max torque
- 6061-T6 aluminum
- ISEV-MM is for a Shimano I-SPEC EV shifter mounting to a SRAM MatchMaker brake

$24.95
Replacement Bar Plugs for the WTC Singletrack Pogie.
- Quick install and removal of pogies via proprietary quarter turn bar plug mounting system

$29.95
Offered in multiple sizes and applications, Wolf Tooth Components' ReMount places your dropper lever in a more ergonomic position tha allows you to keep a better grip on the bar while actuating your dropper post.
- Available in standard 22.2mm diameter for MTB bars, as well as Shimano I-Spec A&B, I-Spec II, and SRAM MatchMaker options
- Designed to work with cable-actuated dropper levers with pivots parallel to the handlebar's length
- Allows a dropper post remote to be below the bar and on its side for better ergonomics

$29.95
The RoadLink DM (Direct Mount) is the RoadLink designed to fit Shimano’s current generation R8000 Ultegra and R9100 Dura-Ace rear derailleurs. It serves as a simple device to offset the position of the rear derailleur, making it possible to run a wide-range mountain bike style cassette. It’s an ideal solution for riders looking to convert their road, gravel, cyclocross, or commuter.
- Fits Shimano R9100-generation Dura-Ace and R8000-generation Ultegra rear derailleurs
- CNC machined from 6061-T6 aluminum with stainless steel bolt
- Does not change the derailleurs total chain wrap capacity
- Fits standard derailleur hangers only
- Best used with Single or Double Setups - see manufacturer's site for more details

$29.95
Wolf Tooth designed these bolts to be the best on the market. These optimized single chainring bolts have a 4 mm hex socket on the bolt and a 6 mm hex socket on the nut...that's right, no more spanner for your single ring bolts! These are 6 mm long so they work perfectly with any bolt-on single chainring that does not have threaded standoffs.
- Design and manufactured in Minneapolis, MN USA
- 7-8 NM tightening torque with light grease on threads only
- Material - 7075-T6 aluminum
- Weight - 5 bolts = 10 grams

$29.95
Wolf Tooth ShiftMounts are adapter mounts that allow you to integrate SRAM and Shimano shifters with several different brakes from Shimano, SRAM, and more. Handlebar space is prime real estate and the ShiftMount seamlessly integrates brakes and shifters for a clean look.
- Designed to work with rear (right side) brakes and shifters
- Consult the brake and shifter manufacturers to understand which mounting interface you have on your brakes and shifters
- For handlebar clamp ShiftMounts tighten clamp bolt to 1-2 Nm max torque
- 6061-T6 aluminum
- ISEV-ISB is for a Shimano I-SPEC EV shifter mounting to a Shimano I-SPEC B brake

$29.95
Wolf Tooth ShiftMounts are adapter mounts that allow you to integrate SRAM and Shimano shifters with several different brakes from Shimano, SRAM, and more. Handlebar space is prime real estate and the ShiftMount seamlessly integrates brakes and shifters for a clean look.
- Designed to work with rear (right side) brakes and shifters
- Consult the brake and shifter manufacturers to understand which mounting interface you have on your brakes and shifters
- For handlebar clamp ShiftMounts tighten clamp bolt to 1-2 Nm max torque
- 6061-T6 aluminum
- ISEV-ISII is for a Shimano I-SPEC EV shifter mounting to a Shimano I-SPEC II brake

$29.95
- ShiftMounts are adapter mounts which allows you to integrate SRAM and Shimano shifters with several different brakes from Shimano, SRAM, and Magura.
- Handlebar space is prime real-estate and this ShiftMount integrates seamlessly for a clean look.
- 6061 T6 aluminum
- Weight: 8g
- Made in the USA

$29.95
Wolf Tooth ShiftMounts are adapter mounts that allow you to integrate SRAM and Shimano shifters with several different brakes from Shimano, SRAM, and more. Handlebar space is prime real estate and the ShiftMount seamlessly integrates brakes and shifters for a clean look.
- Designed to work with rear (right side) brakes and shifters
- Consult the brake and shifter manufacturers to understand which mounting interface you have on your brakes and shifters
- For handlebar clamp ShiftMounts tighten clamp bolt to 1-2 Nm max torque
- 6061-T6 aluminum
- MM-ISII is for a SRAM MatchMaker shifter mounting to a Shimano I-SPEC II brake
- MM-ISII is compatible with M9020, M9000, M8000, M7000, and M6000 brake levers
- MM-ISII is compatible with, but not designed for SRAM AXS because the shift lever will be further towards the end of the bar, or closer to the rider's hand than is ideal for most riders

$36.95
The Wolf Tooth Quick Release Seatpost Clamp allows for easy saddle height adjustments. An ergonomic lever on the side of the clamp opens and closes the clamp, which is held together by a bolt with a bronze bushing that lets the rider set the torque. It is friendly with carbon, steel, alloy, and titanium frames.
- Bronze bushing for smooth lever action
- Low-profile ergonomic lever
- Stainless steel bolt with spherical washer
- CNC machined 6061-T6 aluminum

$39.95
- ShiftMounts are adapter mounts which allows you to integrate SRAM and Shimano shifters with several different brakes from Shimano, SRAM, and Magura.
- Handlebar space is prime real-estate and this ShiftMount integrates seamlessly for a clean look.
- 6061 T6 aluminum
- Weight: 8g
- Made in the USA

$44.95
Tanpan allows the usage of Shimano Road Shifters with Shimano Dynasys rear derailleurs. Built to translate the differing cable pulls between the two systems, Tanpan allows for wider gear range, more gear options and better chain security with clutch derailleurs for road or gravel drivetrains.
- Not Compatible with Tiagra 4700
- Compatible with most road, CX and gravel bikes
- Designed to mount directly to adjuster-free cable stops on Shimano rear derailleurs
- Certain chainring and cassette configurations benefit from a Goatlink
- If the rear derailleur cable is routed internally through the chainstay and exits at the end of the - chainstay above the axle or past the axle out the very end, you will need to utilize the inline ferrule

$69.95
ReMote Dropper Lever
- Lever pivots on a 21mm ball bearing for smooth operation
- Cable Kind Clamp does not damage secured cables and features captive hardware.
- Includes barrel adjuster for on the fly changes
- Engineered break-away pivot that allows the lever to break away from the pivot in the event of a crash.
Page 1 of 2
Next page