Bring power to every ride, on- or off-road. If you already own a compatible Garmin pedal-based power meter (Rally XC, Rally RK or Vector 3), use this conversion kit to easily swap your power sensor to new pedal bodies for use on another bike. This kit contains all the components you need to make the switch. NOTE: This product contains pedal bodies only, spindles and electronics are not included. In the box: - Left and right pedal bodies (SHIMANO SPD-SL style) - Replacement seals - 55 mm Q-factor washers - Battery doors
Built to take on anything, the Speedplay Zero road pedal is uniquely qualified to withstand the demands of everything from all-out racing to the epic grind of a double-century. The stainless steel pedal and integrated cleat system offer peak power transfer and exceptional durability, while the customized fit and dual-sided entry will allow you to crank on the pedals in confidence and comfort. Speedplay is the only pedal system to provide independent fore-aft, left-right, and float adjustability to optimize fit and enhance performance through better biomechanics. Designed specifically to maximize every performance advantage the Speedplay platform offers, Zero is a lightweight race-ready, multipurpose pedal that’s durable enough to go the distance ride after ride. - Weight: 220g (per pedal pair) - Spindle Material: Stainless Steel - Spindle Length: 53mm - Float: Fixed-15º Micro-Adjustable - Cornering Angle: 37º - Bearing: Sealed
The Baldwin offers the best of both worlds bridging the gap between the demands of XC racer to the enduro rider. It features the tried and true Posi-Lock retention system protected by a robust 6061 CNC body providing extra support. - Weight: 292g Ti - Body: 60661 CNC AL - Spindle: Titanium - Bearings: 3 Cartridge - Springs: SWP - Cleat: XPEDO XPT (6° Float) *Titanium spindles have 180lbs weight limit.
Shimano Ultegra R8000 pedals. - Pro-level performance and lightweight for the enthusiast - The legacy of Shimano design, quality and performance - Carbon-composite body - Extra-wide platform for a more efficient transfer of power - Adjustable entry and release tension settings - 4mm longer axle available - Low stack height - 0.7mm lower than PD-6800 - Model Number: PD-R8000 - Series: Ultegra - Pedal System: SPD-SL - Average Weight: 248 grams
$162.50 - $197.50
The OneUp Aluminum Pedals features a huge (115x105mm) super grippy platform with 10 rear-loading hexagonal steel pins per side to keep your feet planted on even the roughest of trails. With a weight of only 365g, the OneUp Aluminum Pedals won't slow you down on the climbs. Designed from stealth rubber down and shaped with a subtle convex profile to provide you with more grip thanks to the pedals sitting in the natural arch of your foot. The ultra-thin design (only 8mm at the leading edge) gives you maximum clearance to reduce pedal strikes and deflect off trail obstacle. Clip Less, Ride More. When it s finally time to service your bearings, the unique cassette tool lock ring system makes re-greasing the bearings exceptionally fast and easy. FEATURES - 10 rear loading custom hexagonal removable pins per side for maximum grip - Ultra thin leading edge chamfered design to deflect off any obstacle - Fully sealed and serviceable design with built in bearing extractor - Wide platform design for increased stability - Contoured shape provides ultimate connected feel SPECS - Weight: 365g - Platform Size: 115x105mm - # of Pins: 10 per side - Axle Material: Chromoly steel - Height: 8.3-12mm - Pin to Axle distance: 112mm - Color: Black, Green, Grey, Blue, Orange, Red, Purple, OilSlick - Body Material: 6061-T6 Aluminum COMPATIBILITY - Currently, due to the deep counterbore of the crank arms, these pedals are not compatible with SRAM Carbon cranks. - These pedals are not compatible with crank boots without modification to the crank boots. We recommend removing crankboots before installation.
The Dagga is our brand new DH pedal. It was designed in collaboration with Chris Kovarik – one of the forefathers of downhill and flat pedal riding. Kovarik's unique and high-impact riding style inspired the Dagga's key features – our largest platform and widest stance ever. - Meant to be ridden with thick-soled shoes, the Dagga offers improved stability, power and articulation of the bike. - The Dagga features the same high strength chromoly axle system as other models with a double seal, inner bushing and outer cartridge bearing. - Largest Q-Factor, largest body, longest and largest amount of pins!
- Pedal Weight (pair): 260g - Size: 102 X 96 X 11 mm - Body Material: magnesium extruded / CNC machined - Spindle: CNC machined, cr-moly - Pedal Bearings: thrust bearings / IGUS bushings - Pins: replaceable SAP (1/8" x 8mm) pins
Xpedo's designers went back to the drawing board for the GFX to create a fresh new design to meet the demands of the evolving downhill racing styles. The latitude entry system allows rapid engagement in any condition, positioning the front claw upwards for intuitive, seamless contact with the pedal. The Posi-Fit retention system is fully adjustable for fine-tuning the entry and release. The low-profile 6061 CNC body with adjustable height pins provide traction and support with any style of shoes. Tapered cromoly spindles roll on three precision cartridge bearings for easy maintenance. Wider Q-factor allows ample clearance between shoe and crankarm. - Weight: 468g CrMo - Body: 60661 CNC AL - Spindle: Cromoly - Bearings: 3 Cartridge - Springs: SWP - Pins: 16 adjustable height grub pins per pair - Cleat: XPEDO XPT (6° Float)
Based around SPD technology, DMR has engineered an extremely adaptable caged-clip system with the V-Twin. These pedals offer a number of different grip and feel options by utilizing a range of pins paired with a unique nylon "bumper" and metal shim feature. - Large, extruded and CNC'd aluminum platform cage - SPD-compatible design with 5 degrees of float - Nylon 'bumper' and steel sizing shims customize platform feel - Serviceable bearing system - 7 tuneable pins per side (full set supplied) - 4140 chromoly axles - Anodized finish - 9/16"
When it’s time to update the flagship XTR pedals, we look at every detail under a microscope. Off-road racing demands speed, focus, and control. And that’s exactly what the PD-M9120 delivers. Increased drivetrain efficiency, an intuitive and seamless interface, and predictable steering and traction control are the benchmarks of the M9100 series pedals. The M9120 are the weapon of choice for WC racers worldwide. BETTER MUD CLEARANCE - Cylindrical contact area sheds mud even better for consistent stepping-in & out performance and rider confidence. ADDED EFFICIENCY + DURABILITY - Increased axle strength for long service life. M9100 comes in two axle lengths – 52 mm and 55 mm crank to pedal center. LARGER CONTACT AREA - The M9120 platform is designed for maximum shoe-to-pedal contact area without extra weight or rotating mass. Cage protects the binding and makes step in easy. BETTER MUD CLEARANCE - Wider edge-to-edge contact area provides solid shoe-to-pedal interface, transmits power more efficiently for faster and more consistent acceleration, and better bike control.
- Pedals feature a fully CNC-machined platform out of 2014 T6 aluminium with anodized finish - The axle is made of high strength Cr-Mo, heat-treated and plated - The platform is slightly concave in shape to give maximum support - Each pedal uses a norglide bushing and three cartridge bearings in a fully sealed chamber to give a long smooth life - Replaceable pins per pedal provide excellent traction and grip. (Titanium and hollow pins available)
When it’s time to update the flagship XTR pedals, we look at every detail under a microscope. Off-road racing demands speed, focus, and control. And that’s exactly what the PD-M9100 delivers. Increased drivetrain efficiency, an intuitive and seamless interface, and predictable steering and traction control are the benchmarks of the M9100 series pedals. The M9100 are the weapon of choice for WC racers worldwide. BETTER MUD CLEARANCE - Cylindrical contact area sheds mud even better for consistent stepping-in & out performance and rider confidence. ADDED EFFICIENCY + DURABILITY - Increased axle strength for long service life. M9100 comes in two axle lengths – 52 mm and 55 mm crank to pedal center. BETTER MUD CLEARANCE - Wider edge-to-edge contact area provides solid shoe-to-pedal interface, transmits power more efficiently for faster and more consistent acceleration, and better bike control.
- Enhanced pedal-to-shoe contact area with mud-shedding profile - Wide bearing placement for rigidity and uniform load distribution - Slimmer, weight-optimized axle with 2 length options - Low platform height for pedaling stability - Lightweight, 310 g (11 oz.) per pair - Slimmer axle housing better sheds mud and debris - Binding Dual Sided - Cartridge axle - SM-SH51 Cleat included - Cleat retention adjuster - Offset binding - Sealed mechanism - Average weight: 310g (Short axle type) - Optional cleat: SM-SH56 - Pedal Type: Off-Road (SPD) - 3 mm shorter axle version (52mm) - 1.0 mm cleat spacer included
Torqlite UL Pedals feature a CNC machined ultra-light body with an incredibly thin 17mm platform for extra clearance. - Large platform for extra stability - Hardened chromoly replaceable pins - Heat-treated chromoly spindle - Sealed cartridge bearings - Spindle size: 9/16-inch - 395g/pair
Competition-oriented and customizable for refined fit, feel, and power transfer. Details - Durable alloy body - Durable cast steel wings - Integrated traction pad technology to optimize the shoe/pedal interface - Ribbed body for better traction when unclipped - Chamfered edges to reduce rock-strikes - Hex alloy endcap and bashguard - 4-sided entry / superior mud shedding - Customizable float & release angle - Premium bearings & double seal system Specs - Body Material: 6061-T6 aluminum - Cleats: Premium brass cleats with shims included - Endcap: Hex alloy - Inner Bearing Type: Igus LL-glide bearing - Max Rider Weight: No restriction - Outer Bearing Type: Enduro cartridge bearing - Q-factor: 52mm - Release Angle: 15° / 20° - Spindle Material: Forged scm 435 chromoly steel - Spring Material: 300 series stainless steel - Warranty: 5 years - Weight: 320g per pair - Wing Material: 17-4PH stainless
Crank Brothers Mallet DH, the choice of DH world champions. - Concave platform for secure foothold - 8 adjustable pins per side for grip - Traction pad technology customizable interface - Ribbed body for better traction when unclipped - Chamfered edges to reduce rock-strikes - 57mm q-factor for stability at speed - 4-sided entry / superior mud shedding - Customizable float and release angle - Premium bearings and double seal system - Spindle material: Forged scm 435 chromoly steel - Body material: 6061-T6 aluminum - Wing material cast: Stainless steel - Spring material 300 series stainless steel - Release angle 15° / 20° - Max rider weight no restriction - Q-factor 57mm - Inner bearing type IGUS LL-glide bearing - Outer bearing type enduro cartridge bearing - Cleat premium brass cleats with shims included - Adjustable pins 8 per side for grip - Endcap hex alloy - Weight: 479 grams
The ultimate pedal for enduro riding and racing, with a longer spindle. - Concave platform for secure foothold - 6 adjustable pins per side for grip - Integrated traction pad technology to optimize the shoe/pedal interface - Ribbed body for better traction when unclipped - Chamfered edges to reduce rock-strikes - 57mm q-factor for increased shoe clearance and control - 4-sided entry / superior mud shedding - Customizable float & release angle - Premium bearings & double seal system - Adjustable Pins: 6 per side - Body Material: 6061-T6 aluminum - Cleats: Premium brass cleats with shims included - Endcap: Hex alloy - Inner Bearing Type: Igus LL-glide bearing - Max Rider Weight: No restriction - Outer Bearing Type: Enduro cartridge bearing - Q-factor: 57mm - Release Angle: 15° / 20° - Spindle Material: Forged scm 435 chromoly steel - Spring Material: 300 series stainless steel - Warranty: 5 years - Weight: 424g per pair - Wing Material: 17-4PH stainless
For enduro riding and racing, it's all about the Crank Brothers Mallet E pedals. Winner of a Design & Innovation Award for 2016, this pedal features a concave platform for a secure, grippy foothold, and six adjustable pins per side for even more security. The adjustable traction pad interface keeps you in contact with the pedal so you can focus on your line. Four-sided entry ensures your foot will catch quickly and easily, as well as helping the Mallet E shed mud like no other. A 52mm q-factor is your best friend on tight trails, because who wants to be clotheslined by a tree? Not you, that's for sure. Throw in chamfered edges to ward off rock strikes, and a customizable float and release system and you're ready to shred. Specifications: - spindle material: forged scm 435 chromoly steel - body material: 6061-T6 aluminum - wing material: 17-4PH stainless - spring material: 300 series stainless steel - release angle: 15° / 20° - q-factor: 52mm - inner bearing type: igus LL-glide bearing - outer bearing type: enduro cartridge bearing - adjustable pins: 6 per side for grip - endcap: hex alloy - cleat: premium brass cleats with shims included - weight: 419g per pair
$169.99 - $179.99
Foot, meet pedal. Thanks to the Stamp, you two will be closely acquainted. After scrutinizing data from the outsoles of top mountain bike shoe brands, Crank Brothers discovered that two distinct surface areas can optimize the shoe/pedal bond through the whole range of shoe sizes. The result is the Stamp, a pedal with minimum profile and maximum concavity. Specifications: - spindle material: forged scm 435 chromoly steel - body material: forged 6061-T6 - inner bearing type: igus LL-glide bearing - outer bearing type: igus LL-glide bearing - footprint: 100mm x 100mm (small) / 114mm x 111mm (large) - adjustable pins: 10 per side - minimal profile: 11mm-13mm thin - stamp small recommended for shoe sizes: 5-10 (us) // 37-43 (eu) - stamp large recommended for shoe sizes: 10-15 (us) // 43-49 (eu) - weight: 375g per pair (small) / 405g per pair (large)
TMAC Signature Tyler McCaul Pedal. With over two years of development, it features one of the most concave designs on the market. Not only does the TMAC pedal give precise control, the non-offset design provides more contact with the pedal with equal weight distribution in front and back of the pedal spindle. This non-offset design feels like the largest pedal ever made at a mere 110mm x 105mm footprint. - Tyler McCaul signature pedals - 110mm x 105mm footprint - Super-concave 2.5mm deep pedal profile per side - 14mm thin at the center - Symmetrical pedal profile for added foot support and stability - Dual sided pins with pre-applied Loctite - Includes extra set of back-up pins - Load distribution system to prevent bearing blowout - Multi-micro-sealed bearings and Deity DU Bushing internals - Heat-treated chromoly spindle that is compatible with a standard 15mm wrench or 8mm allen - 9/16"
Low And Lean Made from super-strong 6061-T1 aluminum, the double concave body is sleek and light while still giving your foot a nice wide platform to stand on. Round And Round We Go Fully sealed 4-bearing design makes for smooth rolling rotations over an extremely long life. And the ability to rebuild makes it nearly unkillable. Ride Don't Slide Pins at the front and back of the pedal are angled slightly to provide improved traction and foot comfort. Because pedal bites suck. Look Good Ride Good Our top of the line pedals come in 6 different colors so that you can add as much flavor and flair to your ride as you like. Pedal Envy More than just a trusty platform for stomping landings and railing around berms, the Atlas Pedal has long been Race Face's top contender. It's strong, thin, concave, lightweight, rebuildable, and ideally suited for getting wild in the woods. Specs: - Axle Material: Chromoly Steel - Body Material: 6061 Aluminum - Material: 6061 Aluminum - Platform Height (MM):14.5 - # of Pins: 20 SHCS hex traction pins per pedal (10 per side) - Platform L x W (MM): 114 x 101 - Weight: 355g
The T1-SX BMX pedal offers excellent spring tension and feel. Unclipping under maximum load is a thing of the past with the T1-SX's hook plate techology. EVO+ bearing system featuring IGUS bushings keeps these pedals running smoothly. - 68 x 84 x 17mm - 9/16"
KEO BLADE CARBON pedals feature a Chromoly+ axle and stainless steel bearings for extreme reliability. Beyond its weight, the surface contact area-to-weight ratio is the best in class. Light, aerodynamic and powerful, these pedals have all you need to take it to the next level. - Technology: Blade - Cleats: Keo Cleat - Retention: Serial installed in 8 + additional 12 in box - Body: Carbon - Blade: Composite - Spindle: Chromoly+ - Bearings: Steel - Platform area: 700mm² - Platform width: 67mm - Q Factor: 53mm - Stack height + cleats: 14.8mm (8.5 + 6.3mm) - Weight (pedal): 115g - Weight (pair + cleats): 300g
- Power transfer and stability are maximized with a large, 725mm2 surface area. - Bottom fairing to improve aerodynamics and protect the carbon blade. - TIME's patented preopened ICLIC system allows for fast and easy cleat engagement. - Tension adjustment on the carbon blade has three positions to precisely manage the pressure of the clamping mechanism. - Hollow, stainless steel axle. Specs: - Pedal Material: Carbon - Pedal Weight: 113g - Cleat Compatibility: ICLIC - Spindle Material: Steel - Pedal Bearing: Ball bearings - Pedals Thread: 9/16"
The XPro 10 is perfect for high performance riders. With a carbon body and hollow steel axle the XPro 10 is light and durable at the same time. The ICLIC system is pre-opened making clipping in super easy. The XPro 10 features carbon blade tension adjustment, a low stack height and an oversized pedal platform for pedaling efficiency and comfort.
- Weight: 210g CrMo - Body: Carbon Injection-Molded - Spindle: Cromoly - Bearings: 3 Cartridge - Retention: MDU Elastomer (Preset) - Q-Factor: ±53 (mm) - Cleat: XPEDO THRUST 7 (6º Float or Fixed)
$135.00 - $170.00
- Pedal Weight: (pair) 305g - Cleat Weight: (pair) 64g - Size: 56 x 41 x 17.5 mm - Body Material: aluminum extruded / CNC machined - Spindle: CNC machined cr-moly - Pedal Bearings: sealed bearings / IGUS bushings - Cleat System: X1E / X1 (HT exclusive system)
Get a little more ankle room with this long-spindle version of Crank Brothers' Mallet E pedal. - Concave platform for secure foothold - 6 adjustable pins per side for grip - Integrated traction pad technology to optimize the shoe/pedal interface - Ribbed body for better traction when unclipped - Chamfered edges to reduce rock-strikes - 57mm q-factor for increased shoe clearance and control - 4-sided entry / superior mud shedding - Customizable float & release angle - Premium bearings & double seal system
Riding in deep, sticky snow just got a whole lot easier. 45NRTH's Helva pedals feature an open CNC-forged body that excels at shedding snow. Its super thin 9mm profile gives you maximum clearance while cornering and riding in deep ruts, plus they're light. Sealed DU bearings keep them spinning smooth and replacement pin kits are available (sold separately) in seven different colors so you can color-coordinate your rig. - Size: 110mm wide x 100mm long x 9mm high - Spindle diameter: 9/16-inch - Weight: 308 grams
The AE05 Evo+ Platform pedals have replaceable pins on a concave, extruded, CNC-machined aluminum body for a stiff and responsive feel, while dual DU bushing bearings keep them turning smoothly. These 17mm-thick pedals provide tons of clearance. - Platform: 100 x 96 x 17mm (12 mm center) - Constructed from extruded aluminum with CNC machining - Dual DU bushing internals - 10 replaceable pins per side - 9/16"