Saddles

The PS 2.0 is the updated version of the popular ISM "Road" saddle. It features 30-series foam and gel padding, and is ideal for triathlon, time trial, and road bikes. Similar to the other PS series saddles, the PS2.0 features a slight upward slope at the rear—providing superb hip support when your body is rotated forward in the aero position, or an aggressive road riding position. This tends to be preferred by athletes that don’t move around on the seat excessively while riding. They are a top choice for triathletes and time trialists who ride in the aerobars, or for flat courses in which the athlete likes to 'settle in' to one position and go. Like all ISM saddles, the PS2.0 is nose-less and designed to remove pressure from soft tissue, ensuring maximum blood flow, no genital numbness, and a healthier, more enjoyable ride. Key features: - Sloped rear section provides maximum hip support - Rear transition hook Commonly used for: - Triathlon bikes - Time Trial bikes Tech specs: - Category: Performance Short - Length: 245mm - Width: 130mm - Padding: 30-series Foam and Gel - Rails: Chromoly

The new 6OX Infinergy Ergowave active saddle utilizes BASF Infinergy cushioning (the same material used in running shoes). This material is very robust and brings comfort to a whole new level, especially in off-road conditions, due to its quicker recovery - The cover is not pulled over the entire surface of the saddle as in classic saddles. There are only "tapes" in the important places - Active design offers dampened lateral tilt which allows the saddle to follow the biomechanical movement of the pelvis on each pedal stroke

The Butterfly Carbon is the lightest of the Butterflies thanks to the addition of carbon rails. It's wider in the rear than typical saddles for good support of a woman's sit bones. The Butterfly Carbon's low profile, flat top, and a complete cutaway through the center are designed to provide pressure relief and support in the right areas. Injection-molded foam is used to provide the right balance of softness and stiffness so you won't sink into the saddle the longer you ride. - Black leather with gloss butterfly graphic and patent leather rear - Signature Butterfly cutaway through the center of the saddle for pressure relief - Length x width: 262mm x 155mm - Weight: 218 grams; 7.7 ounces - Rails: lightest weight Carbon 10mm H (+/- .5mm) x 7mm W (+/- .5mm) note: check seat post for compatibility as it may require an adapter kit (available from some seat post manufacturers)

The weight-optimized 611 Ergowave Carbon was designed to precisely accommodate the requirements of off-road cycling and perfectly meet the demands of All Mountain and Enduro use. At just 150g, it's the lightest 611 in the Ergowave family. The wave-like shape and raised rear section provide perfect rearward support and an optimal pressure distribution which reaches deep into the body structures to result in improved power transmission. The lowered nose, in combination with the dip, provides optimal pressure relief for the perineal area. For even more pressure relief, especially on long technical climbs, the saddle nose of the 611 was made approximately 4mm wider than that of the 612, but just as flat and with the largest possible surface area. The padding was designed for the specific needs on the MTB with better dampening properties than the 612 making it perfect for rough off-road terrain. Additionally, a premium quality Kevlar material protects the saddle in the exposed places.

The Perfect Reflection of You. The Power Expert with Mirror saddle combines comfort and performance for riders whether they are podium-seeking crushers or everyday cruisers. The Body Geometry designed Power shape with high-tech Mirror inserts provide sit bone-friendly support road to mountain uses. ATTAINABLE TECH: The Power Expert with Mirror saddle provides riders with a significant reduction in pain-causing pressure when compared to it's foam counterpart, the Power Comp Saddle. Inside the saddle are two tear drop shaped Mirror Technology inserts that target sit bone pressure. Riders around the world will be stoked that the new Expert level Power Saddle with Mirror technology make these benefits more attainable than ever. POWER SHAPE: Our beloved Power shape, with a cutout. The patented Body Geometry design is lab-tested to ensure blood flow to sensitive arteries. Is it a road saddle? Mountain saddle? In short, yes. We hate to say a product works "for everything", but it does. We believe that performance-in saddle speak-means comfort. And whatever shape and material suits you, will be your highest performing saddle. MIRROR TECHNOLOGY: We developed Mirror technology by 3D printing from a liquid polymer to be a perfect reflection of you. Mirror technology allows for infinite density tuning with a single material, but any material is only as good as the designers and engineers that use it. Thanks to our Body Geometry methodology, Retul data, and decades of experience, the 3D-printed matrix is tuned to support the sit bones across a greater area, creating a hammock effect that lets the saddle support your weight, not the tissue around your sit bones. ANY BODY, EVERY RIDE: We know that every body is different, but the issues facing riders in the saddle are the same—sit bone pressure, scar tissue build-up, and blood flow loss. Using pressure mapping, blind comfort studies, and blood flow studies, Body Geometry and Mirror Saddles don't just promise to solve these issues for people-we've proven they do. Plus, this is the first saddle with Mirror technology in additional sizes (130 and 168). ALL AROUND USE: The Power Expert With Mirror saddle uses the same 3D printed technology as the S-Works Power with Mirror except the Expert has 4-way stretch cover to keep mud and debris out of the nooks and crannies of the Mirror lattice. That dirt-shedding feature, plus super durable, yet light weight hollow titanium rails make the Power Expert with Mirror the smart choice for gravel and mountain riders, in addition to those who stick to paved surfaces. Web Bullets - Patented Body Geometry design is lab-tested to ensure improved comfort and blood flow to sensitive arteries. - Mirror technology inserts to provide additinal sit bone relief. - SWAT-compatible mounts molded into the saddle base allow for sleek and integrated storage solutions. - Lightweight and durable hollow Ti rails. - Supportive and lightweight PU foam surrounding the 3D printed inserts. - Size 130mm / Weight: 210g - Size 143mm / Weight: 214g - Size 155mm / Weight: 225g - Size 168mm / Weight: 227g

LIGHT GEL The particular layer of "Light Gel" inside the padding ensures great comfort, even over long distances. SUPERFLOW The Superflow central cutout allows to adequately discharge pressure from the perineal area. 155mm WIDE The increased width of the saddle (155mm) ensures greater support to the ischial bones and allows you to satisfy pedaling needs. - Designed to meet the growing demand for comfortable and ergonomic saddles - Fibra-tek is Selle Italia's latest cover material offering supreme durability - Ti 316 7mm rails are hollow titanium, a balance of strength and lightweight - Dimensions: 248x155mm - 234g

- Developed in cooperation with Patrick Lange and the BMC-ViFit Triathlon Team to achieve the cutting edge in comfort, aerodynamics, and pedaling efficiency - Triathlon-specific shape with water bottle cage and rack inserts - Superflow cutout for comfort and pressure relief - Titanium Rails and Duro-Tek cover for performance-driven durability - 255 x 135mm - 235g

SM Enduro saddle for performance-oriented enduro and gravity riders was developed and race tested in the Enduro World Series. The SM Enduro has a V-shape and a flat top, providing maximum freedom of movement in technical terrain. To ensure even better bike control with your legs all contouring edges are comfortably padded. - The narrow and short V-Shape seating surface ensures optimum freedom of movement and easy position shifting - The saddle enhances steering input and control to the bike through the inside of your thighs, which is why the contact zones are padded all-around - Gender: Men's - Rail Material: Titanium - Clamp Style: Standard Rails - Material: Synthetic

- 3D reactive damping reduces shock and vibrations - Relief channel for perineal area comfort - Ergonomic BASF Infinergy core absorbs road shock, vibrations and reduces stress on lower back - Not rated for MTB use

Seated pressure relief for male road cyclists in a lightweight carbon package. Flat contour, yet still comfortably padded. The overall shape and the relief channel with its deep cut-out perfectly match the male anatomy in a low, forward-tilted riding position typical of road cycling. The highly sensitive perineal area is effectively unloaded, preventing any discomfort. OrthoCell-Inlays in the seating area generate the best possible pressure distribution. The innovative OrthoCell material ensures maximum reset forces and is also more durable and lighter than gel. - Lightweight at only 195 grams (size S/M).

First seen on the race circuit, now available to the public. Until now the superlight carbon version of the SR Women series has been exclusive to the Canyon//SRAM Women's Team. Shape and relief exactly fit the female anatomy in the typical race related sitting position. OrthoCell-Inlays in the genital and sitting area provide optimum pressure distribution. The innovative OrthoCell material ensures maximum reset force and is also more durable and lighter than gel. Sliding flanks help reduce friction when pedaling. - Lightweight at only 170 grams (Size S/M).

In designing the Corta saddle for women, we endeavored to create an entirely new shape for performance riders whose riding style has evolved. Maybe you're more competitive, riding longer distances, or have a new bike that you can't get comfortable on – this snub-nose style saddle could be your solution. The Corta has a shorter overall length and a dropped nose which combine to eliminate excess surface area, prevent chafing, and alleviate pressure. We've also engineered it with our largest cutaway for the greatest relief channel possible. It's supportive and flat at the rear so you have a good platform for sustained, seated climbs. Aesthetically, the Corta is a streamlined beauty with textural detail and state-of-the-art technology. If you're ready to step up to the latest in technology, Terry comfort engineering, and high-performance design, Corta was made for you. - Seamless bond between Dura-tek cover and micro-suede panels provides a smooth contact surface to reduce chafing - Screen-printed graphics and perforations - Largest cutaway in the Terry saddle line - Length x width: 250mm x 149mm - Weight: 235 grams - Rails: Ti-316

Brooks' B15 Swallow has been described as the precursor to all modern racing saddles. When it was first patented in 1937 it became immediately popular among the professional racers of the era, and has remained imminently popular amongst cyclists who prefer a sporty, performance-oriented saddle. Like every Brooks saddle, the B15 Swallow shapes itself to its rider over time, ensuring the timeless, customized support that the company's reputation is built upon. And, of course, the B15 Swallow features Brooks' full-grain, premium tanned leather and trademark rivets for the ultimate in comfort, style, and durability.

Versatile and ultra-light, the Verse Pro gets a shorter profile for elevated comfort for riders of all genders and disciplines. Less is more A shorter profile elevates comfort across all riding positions for the top trim level of our most versatile performance saddle. Verse Elite’s targeted support and versatile design is ideal for all riders and genders. Carbon rails and a composite shell keep it ultra-light with added compliance. A full cutout ensures long-haul comfort, and Wing Flex allows the saddle shell's side edges adapt to riders’ inner leg movements and pelvic rotation. Product details: - Short profile provides targeted support for riders of any gender in a performance riding position - Wing Flex allows the shell's edges to adapt to rider's inner legs movement and pelvic rotation - Full saddle cutout minimizes soft tissue pressure for lasting comfort and performance - Lightweight carbon-reinforced shell perfectly balances weight, strength, and compliance - Oversized carbon rails for lightweight strength (specific seat post ear clamps required) - Multiple widths and extended rail clamping area give more fit options - inForm saddles are born of cutting-edge biomechanical research to maximize performance and rider comfort - Blendr accessory mounts offer clean integrated mount for rear Flare light Features: For men, for women, for mountain, for road. Verse Short is designed to add comfort for all genders. It's your go-to performance posture saddle for both trail and road. Short profile The short profile provides targeted support and a performance riding position for all genders. Wing flex Wing flex allows the saddle shell's side edges to flex and adapt to a rider's inner leg movement and pelvic rotation. Full-length cutout A full saddle cutout minimizes soft tissue pressure for lasting comfort and performance. Blendr integration Easily mount Bontrager Flare rear lights with the Blendr accessory mount, available separately.

Terry's longest distance, lowest profile, widest cutaway Butterfly with something extra: Poron XRD. Designed to take comfort up a notch for endurance riding, the Butterfly Century is engineered with a layer of Poron XRD shock absorbing material between the saddle’s base and foam layers. The Poron XRD reduces road shock and allows for a thinner layer of foam and a narrower overall saddle profile, without loss of rider comfort. A larger foam cutout provides greater soft tissue relief. Additionally, the Century features a thin layer of gel along the top, a wider cutaway, sculpted foam for pressure relief in key areas, and a seamless Fibra-tek cover that reduces the incidence of high cadence chafing. - Fibra-tek cover with Poron XRD shock-absorbing layer - Widest cutaway in the Butterfly line up for maximum pressure relief - Length x width: 262mm x 152mm - Weight: 268 grams; 9.5 ounces - Rails: Ti-316

Our longest distance, lowest profile, widest cutaway Fly saddle, with something extra: Poron XRD for shock absorption. Designed to take comfort up a notch for endurance riding, the Fly Century is engineered with a layer of Poron XRD shock absorbing material between the saddle's base and foam layers. This reduces road shock and allows for a thinner layer of foam and a narrower overall saddle profile, without loss of rider comfort. - Seamless Fibra-tek cover reduces the potential for saddle chafing - Poron XRD shock-absorbing foam is flexible to the touch but dampens impact; lightweight, low profile, and breathable material engineered to withstand repeated impact - Wider center cutaway provides for maximum pressure relief - Length x width: 277mm x 137mm - Weight: 257 grams; 9.1 ounces

The name Dimension contains the importance of the project itself: to create an innovative product in terms of size, design and ergonomic shape suitable for all disciplines and perfect for men and women. Dimension is comfort, performance and lightness. The combination of short nose (35mm less than a traditional saddle) and PAS system ensures blood flow and pressure relief, ensuring comfort even in aerodynamic position or maximum pushing phase. The wider seating area (width 143mm) allows a better distribution of body weight. - Rail Material: Ti-Rox - Clamp Style: Standard Rails - Material: Synthetic - Length: 245mm - Width: 143mm - Weight: 190g

Born to be off-road oriented, the Dimension NDR is a unisex multi-discipline saddle able to ensure more comfort for longer riding thanks to 3mm extra padding all over the surface. The round shape supports the natural pelvic rotation and improves the saddle contact. The snub-nose (35mm shorter than traditional saddles) spreads pressure more evenly, especially in aerodynamic & aggressive positions. Thanks to the wider PAS channel, it reduces the compression of soft tissues eliminating numbness and ensuring the blood flow. Side protectors are also fitted to reduce scratches, rips and tears. - Rail Material: Ti-Rox - Clamp Style: Standard Rails - Material: Synthetic - Length: 245mm - Width: 143mm - Weight: 186g

Dimension Tri is a saddle born for triathlon and time trial users, improving comfort in all pedaling phases thanks to the ergonomic “V SHAPE” shape. Along with the PAS channel, these devices guarantee a better blood flow eliminating numbness and excessive pressure. With CPC technology slipping is also eliminated, improving the stability of the athlete and guaranteeing better aerodynamics. - Multicategory saddle suitable for time trial and triathlon users, but also road and off-road - Tirox is a light alloy steel with a standard round size of 7 mm - Injected carbon base - Light padding with a microfiber cover - Rail Material: Ti-Rox - Clamp Style: Standard Rails - Material: Synthetic - Length: 245mm - Width: 143mm - Weight: 202g

A wider center cutaway and the addition of gel along the top are the primary differentiators between this saddle and our classic Butterfly. The wider relief channel, combined with its contoured rear and thin gel layer, makes the Butterfly Ti Gel + extremely comfortable and ideal for endurance riders. Like all Butterflies, the Ti Gel + shares the basic construction characteristics. It's wider in the rear than typical race saddles for good support of a woman's sit bones. The top is flat and low profile, and we've used the ideal blend of stiffness/softness in the injection molded foam to allow for good support and power while pedaling. Outfitted with lightweight ti rails and hand made in Italy. - Leather cover with perforated Butterfly pattern - Thin gel layer along the top of the saddle provides an additional level of comfort - Widest cutaway in the Butterfly line-up for maximum pressure relief - Length x width: 262mm x 155mm - Weight: 255 grams; 9 ounces - Rails: Ti-316

- Classic styled top grain leather saddle - Polished chromoly rails and stainless steel rivets - Integrated mounting tabs for saddle bags - Adjustable tension system - Rail: Chromoly - Cover Material: Leather - Size (LxW): 280mm x 155mm

Wider nose and slightly more padding than the 611 model, with 12mm of shock absorbing cushion - Combination of all the Ergowave and ErgoLux advantages, staged shape provides more free space and less pressure - Incorporates SQlab's unique design where the nose drops down away from the rear of the saddle, allowing for 55% of the rider's weight to be transferred to the ischial or "sit bones" - The Active design offers dampened lateral tilt which allows the saddle to follow the biomechanical movement of the pelvis on each pedal stroke (3 interchangeable firmness inserts included) - High-end, aggressive saddle designed for Trail and Enduro riding - Tough upper material, Kevlar reinforced sides, and grip material on the rear of the saddle

Shorter—Narrower—Lighter—Faster. The 612-R offers more performance based ergonomics from 150 g. The raised rear gives more grip and better power transmission. A big advantage on straight roads and especially uphill. The stronger narrower mid-section and the narrow saddle nose gives more legroom. The proven SQlab ERGOWAVE form relieves the soft tissue area and prevents energy-consuming bad posture. The saddle shell is weight and flex optimized down to the last detail. More longitudinal stiffness and perfectly coordinated material flex to the side mean more comfort with less weight at the same time. The cover is extremely light but also abrasion-resistant and non-slip. The padding is closed-cell and strongly minimized. The comfort comes from the shape and the flex behavior between rail, shell and foam, which is coordinated as an overall system.

Settle in for a remarkably comfortable ride experience. Without sacrificing performance, the WCS Carbon Streem saddle features Ritchey's revolutionary patented Vector Wing technology, which helps eliminate hot spots by dissipating pressure more evenly for all-day comfort wherever your pedal strokes take you. The WCS Carbon Streem enjoys a low profile design and narrow, carbon fiber-injected shell for stiffness and light weight, along with carbon fiber rails, super light foam padding, and a Microfiber cover. Notes: - If used in conjunction with our SuperLogic or WCS Carbon 1-Bolt Seatposts, you will need the 8x8.5mm Carbon Clamp Kit - If used in conjunction with our WCS Alloy 1-Bolt Seatposts, you will need the 8x8.5mm Alloy Clamp Kit - Saddle Dimensions: 278 x 145mm - Superlight foam - Patented Vector Wing structure - Rails: Carbon fiber - Rail Dimensions: 8x8.5mm - Shell: Nylon + carbon - Cover: Microfiber - Available in black or white - 145g (132mm)

Originally introduced in 1999, the Italian-made Fly set the standard for men's saddle comfort. We've sold them to everyone from pro rider to Silicon Valley entrepreneurs. It's a favorite of RAAM riders and randonneurs, and has been hailed by journalists as the most comfortable saddles for men. This particular version, the Fly Ti Gel, is one step up on the comfort scale by virtue of the addition of a thin gel layer across the saddle top. It's intended for endurance/distance riders and triathletes who put more pressure against the front of the saddle. - Black leather cover with screen-printed graphics - Center cutaway with rear relief channel reduces contact points with soft tissue areas - Completely seamless across the top to reduce the potential for chafing - Thin gel layer for added comfort - Length x width: 277mm x 140mm - Weight: 266 grams; 9.4 ounces - Rails: Ti-316

- The Artax saddle is designed for Gravel cycling - Features non-deformable reinforced carbon - Fiber shell and rails, as well as greater padding than a traditional road cycling saddle - Made for tough terrain encountered on gravel bike adventures - UD T700 carbon fiber rails

- The Artax saddle is designed for Gravel cycling - Features non-deformable reinforced carbon - Fiber shell and rails, as well as greater padding than a traditional road - cycling saddle - Made for tough terrain encountered on gravel bike adventures - UD T700 carbon fiber rails

Prologo Nago EVO saddles are part of the Prologo "semi-round" shape family class and offer a great balance between flat and round shapes for both short- and long-distance riding. Best suited for road riding applications. - PAS Technology (Perineal Area System) helps to eliminate pressure spikes and numbness in the perineum - CPC is Prologo's patented "Connect Power Control" technology; Small, hollow, rubber cylinders are strategically clustered at contact points to provide comfortable and secure contact between the rider and the bicycle - Ti-Rox alloy steel rails, highly resistant to traction, and torsion with circular profile measuring 7mm - Light padding, carbon fiber injected base, microfiber + CPC cover - Clamp Style: Standard Rails - Material: Synthetic - Length: 278mm - Width: 141mm - Weight: 202g

For as long as there've been saddles, women have been having issues with them. But where some see unsolvable problems, we see practical solutions. We spent countless hours performing research and prototyping in order to give you the comfort that you've been rightfully longing for. With our patented design, Mimic technology helps create a saddle that perfectly adapts to your body to give you the support you need. And when you combine this technology with our Power Expert saddle, with its hollow titanium rails and level II padding for extra comfort, you get a high-performance saddle that's designed to help you perform at your best. It still features all of the Body Geometry design characteristics you know and love, so you can be assured of superior, all-day comfort in any ride position. - Patented Body Geometry design is lab-tested to ensure blood flow to sensitive arteries. - Innovative Mimic technology uses multilayered materials to maintain equilibrium and minimize swelling in soft tissue. - Lightweight, durable, and hollow titanium rails. - Level II padding: Medium density foam for bike feel with additional cushioning. - SWAT-compatible mounts molded into the saddle base allow for sleek and integrated storage solutions. - Weight: 200g

For nearly three decades, Terry has been working with all levels of riders to solve all types of saddle comfort issues. Introduced in 1999, the Italian-made Butterfly represents the best in all that research and development. The Butterfly Ti has a textured leather cover that will wear beautifully over time and keep you solidly planted on the saddle. Wider in the rear than typical race saddles for good support of a woman's sit bones; completely cutaway through the nose and mid-section, making it flexible and comfortable against soft tissues; low profile, flat top with injection molded foam that's stiff enough to give you more power for pedaling. - Debossed butterfly graphic - Textured leather cover - Signature Butterfly cutaway through center of saddle for pressure relief - Length x width: 262mm x 155mm - Weight: 248 grams; 8.7 ounces - Rails: ti-316