Accessories

Breaking a sweat? Grab some Nuun Sport! When you sweat, your body loses vital minerals and electrolytes that need to be replaced for healthy recovery and lasting performance. Nuun Sport provides a great balance of ingredients for mineral replenishment and optimal hydration before/during/after your workout. - 10 tablets per tube. Dissolve in 16oz. of water. - These statements have not been evaluated by the Food and Drug Administration. This product is not intended to diagnose, treat, cure, or prevent any disease.

The new 8-Bit System is a group of multi-tools designed to work together to solve most trailside fixes. They are lightweight, strong, versatile, and small enough to fit in a jersey pocket or riding tool wrap. Three multi-tools begin the 8-Bit System: 8-Bit Chainbreaker + Utility Knife Multi-Tool, 8-Bit Tire Lever + Rim Dent Remover Multi-Tool, and 8-Bit Pack Pliers. A total of 22 functions between the three tools will keep you rolling to the next town or trailhead. - 17 functions: spoke wrench; valve core wrench; flat head #3.5 and Phillips #2 screwdriver bits; 2, 2.5, 3, 4, 5, 6, and 8mm hex; and T10, T25 Torx-compatible bits; install and remove master links; clear tire sealant clogs from valve stem; tighten valve stem lock nut - Magnets keep all bits in place - Ball detent swivel head helps access hard-to-reach places - Handle doubles as breaker bar for extra torque when head is bent - 8mm hex bit tested to over 40 Nm torque - Pliers works with 9-, 10-, 11- and 12-speed master links and chains (not compatible with Campagnolo 12-speed chains) - Master Link storage is compatible with SRAM PowerLock Link, Shimano Quick-Link, KMC Missing Link and other similar master links (not compatible with Connex Links by Wipperman)

The B-RAD Accessory Strap Mount is designed to add an additional strap point for tire levers, tubes or CO2 cartridges. Mounts to bottle bosses, or to the B-RAD base for additional carrying options. - Mounts to bottle bosses, or to the B-Rad base for additional carrying options - Main strap is 50mm wide and holds loads 75-120mm diameter (3 - 4.75 inches) - Cradle strap is 40mm wide and 350mm long for supporting loads

Wolf Tooth WT-1 Chain Lube is a synthetic lubricant and a chain treatment in the same bottle. As a synthetic chain lubricant, WT-1 will improve the mechanical efficiency of your drivetrain while lasting 3-5x longer than most other chain lubes. As a chain treatment, WT-1 will clean your chain by pushing dirt and debris to the surface where it can be wiped away. It will also protect your chain in all riding conditions, and allow you to ride longer between applications. - Cleans, lubricates, and protects chains - Peak performance in all conditions, wet and dry - Also works on other places of your bike, including hubs, cables, and jockey wheels

This 29mm open bore adapter is used to press 29mm x 42mm (DUB) sealed bearings. The adapter is machined with one step at 29mm OD, which fits into the center of the sealed bearing. For use with Wheels Mfg. bottom bracket press (PRESS-7 , PRESS-7-PRO or PRESS-9-PRO). - Inner step outer diameter: 28.9mm - Outer diameter: 41.8mm - Thru hole diameter: 12.8mm (1/2-inch) - Thickness: 7mm - Machined, red anodized aluminum - Sold individually

BB30 service kit for SRAM DUB cranks. - Includes (2) Enduro 6806/29 ABEC-3 sealed bearings and 2 retaining clips - Bearing Dimensions: OD: 42mm / ID: 29mm / Width: 7mm - Enduro ABEC-3 bearings - Use with SRAM DUB cranks Note: SRAM DUB cranksets are not designed to work in 68mm or 73mm wide shells with inboard bearings. Use only if your frame is a direct-fit bearing system, and the BB shell width is 86.5mm or wider.

- SRAM Thin Flange T47 Bottom Bracket Socket Designed to create a tight grip on thin flange bottom bracket to avoid slipping while torquing cups into bike frames. - This single-sided socket is used for installing and removing 52mm, 16-notch bottom bracket cups. - The socket has a machined 3/8" drive, which can be used to allow 3/8" drive torque wrenches to be attached and locks onto a 1/2 inch UNC press rod for secure and easy installation of thin flanged bottom brackets. - Machined 6061 Aluminum Anodized Red

- High quality set of L-keys - Hex-Plus. - The ball on the long arm allows safe working even in difficult mounting positions. - The BlackLaser surface treatment provides surface protection, corrosion resistance and long life. - Laser coated abrasion-resistant size markings on the L-keys for quick access.

High-quality L-key set with color-coded, convenient plastic sleeve. This ensures that the tool is quickly to hand and the ergonomic and pleasant handle is easy on the hands even at low temperatures. The wear-resistant clip material ensures secure storage of the L-keys as well as simple removal. The Hex-Plus profile offers a greater contact surface in the head of the screw. The notching effect is therefore reduced to a minimum and damage to the screw head more or less eliminated. The ballpoint on the long arm allows dependable working even in difficult installation situations. The BlackLaser surface treatment provides outstanding surface protection, even against corrosion, and a long service life. Laser-engraved and thereby wear-resistant size markings on the L-keys for rapid accessing. - Hex-Plus allows socket head screws to live longer - Hexagonal ballpoint on the long arm - With Take-it-easy tool finder: color coding by size - Color coded, easy-to-grip plastic sleeve, even at low temperatures

Wera offers the Bicycle Set 1, an assortment of tools that is very mobile thanks to its compact and design-oriented textile folding bag, and offers solutions for the most common screwdriving situations when working with bicycles. The sturdy bag contains the bit ratchet Zyklop Mini 1 and 10 bits with all the benefits of Wera-Bit technology, specially adapted to the most common screw connections on a bicycle. - Compact 12-piece wrench set for bicycle applications, also for mobile use - Practical range for DIY assembly work and repairs - Suitable tools for the most common bolt profiles on road bikes, mountain bikes and e-bikes - Robust, surface-friendly, compact textile folding bag - Set includes bit ratchet Zyklop Mini 1 and extension

We know you love the 133, 3133, and 157 baskets. But what happens when you want to haul something that isn't overly large, but can really weigh you down? We thought you'd probably bust out a welding torch and tack a couple of legs on the 133 basket. So that's exactly what we did. The 135 is the exact same size as our popular 133 and 3133 baskets with shorter handlebar mounts and legs bolted to the bottom of the basket. Perfect for a couple of two liters, or a six-pack with some chips and salsa to go. - Basket dimensions: 14.5 X 9.5 X 9 inches - Legs match the finish of the basket - Same size as the popular 133 and 3133 baskets with shorter handlebar mounts

The 157's little brother, this basket is just as functional. Some people don't need to cart around large pizzas or multiple full size grocery bags, so this basket is for the more streamlined commuters and delivery pros. Sturdy one-piece legs offer all the support you'll need when hauling heavier loads. - Fits most bikes - Adjustable legs mount to front axle for a secure fit - 15" x 10" x 5" deep - Easy to install

This versatile basket is based on Wald's popular 133 basket but uses a holder that bolts onto your handlebar. The holder offers greater clearance between the bar and basket for shifters, cables, and brake levers. Available in white (3133WH) or gloss black (3133GB) powder coat finishes. - Made in U.S.A. (Maysville, KY) - A Quick Release Basket with Bolt-on Holder for stable installation and use - Lift the handle to remove the basket and take it with you - Basket locks back in place when returned to the holder - Dimensions: 14.5 x 9.5 x 9 inches; the basket tapers to 12.25 x 7 inches at the bottom - Holder designed to fit 7/8", 1" and 31.8mm diameter handlebar - Handlebar clamps are 2" apart and offer clearance for shift and brake cables - Powder Coat Finish - Complete basket including the holder weighs 3 lbs.

- ELEMNT BOLT GPS Bike Computer - TICKR Heart Rate Monitor - RPM Speed and Cadence Sensors Advantage by design Get everything you need to boost your cycling performance all at once! The ELEMNT BOLT features a patent pending design that integrates the bike computer and mount, resulting in a CFD tested, highly aerodynamic system built to be on the front of your bicycle. Not to mention, it's super easy to set-up and customize with the free companion app and features dual-band technology, wireless connection & uploads, pre-loaded global maps and routes, and so much more. The TICKR heart rate monitor, RPM Speed sensor and pair seamlessly with the ELEMNT BOLT, so that you can get live and accurate performance metrics. The Wahoo ELEMNT Bike Computers are the most integrated GPS bike computers on the market with a full list of compatible hardware and smartphone apps. Includes Mounts for ELEMNT BOLT Bike Computer and RPM Sensors ELEMNT BOLT Two sturdy and secure mount options - an integrated out-front mount and stem mount. RPM Cadence comes with a crank and shoe mount. RPM speed comes with a hub mount.

The KICKR CORE is the latest in Wahoo's line of smart indoor bike trainers. It delivers a realistic, accurate, and quiet indoor training experience by using the proven flywheel technology and advanced algorithms of Wahoo's legendary indoor bike trainers. The KICKR CORE indoor trainer is built with the durabilty to withstand all of your indoor training sessions and no other brand of smart trainers has more apps and software training options, including Zwift and Trainer Road. The Core also features built-in cadence measurement, without the need of an external sensor. PLEASE NOTE: Some assembly is required. The KICKR CORE does not include a cassette or wheel block. These items can be purchased separately. - Wahoo's KICKR CLIMB indoor grade simulator was designed in conjunction with the KICKR smart trainers to deliver an unmatched indoor training experience when combined. - KICKR HEADWIND was designed to deliver innovative climate control to your indoor training experience. - The new KICKR features 12x142 and 12x148 thru axle compatibility in addition to standard 130/135mm quick release. Click to find out if your bike is compatible. - Enhanced power accuracy to provide accurate power measurement and generate up to 1800W. - Maximum percent grade adjusts to simulate up to a 16-degree incline. - Visual confirmation that KICKR CORE is powered, connected and transmitting via Bluetooth and/or ANT+. - ANT+ and Bluetooth capabilities allow it to connect to both smartphones and GPS devices simultaneously or separately. An ANT+ FE-C connection allows the KICKR CORE to be controlled from any FE-C enabled device or application. - Robust steel construction ensures the KICKR CORE stays in place while you crank out the watts and stands up to years of heavy use. - When connected to your device, it automatically sets your resistance via your favorite app or software. - The KICKR flywheel is innovative and proven technology emulates the power and inertia experienced during outdoor riding. It provides the most realistic ride feel especially when using virtual riding/training platforms like Zwift and TrainerRoad. - Get these vital cycling metrics on your indoor ride. - Works with popular training apps such as Zwift, The Sufferfest, Fulgaz and TrainerRoad. - Compatible with a third party power meter.

The Wahoo KICKR SNAP makes indoor training a "snap!" It's a convenient, easy to set-up wheel-on smart trainer with the realistic ride experience Wahoo smart trainers are known for. The SNAP's legendary flywheel features technology that creates the same resistance experienced when riding outdoors. Plus, no other indoor bike trainer has more software training options, including Zwift and Trainer Road. The KICKR SNAP includes LED lights for connection status, third party power meter support, and the power measurement is now accurate up to +/-3%. - Designed for consistent power measurement of up to 1500W and accuracy of +/- 3% so that you can monitor and adjust your intensity. - Visual confirmation that KICKR SNAP is powered, connected and transmitting via Bluetooth Smart and/or ANT+ - Wahoo's KICKR CLIMB indoor grade simulator was designed in conjunction with the KICKR smart trainers to deliver an unmatched indoor training experience when combined. - KICKR HEADWIND was designed to deliver innovative climate control to your indoor training experience. - ANT+ and Bluetooth capabilities allow it to connect to both smartphones and GPS devices simultaneously or separately. An ANT+ FE-C connection allows the KICKR to be controlled from any FE-C enabled device or application. - SNAP's wheel-on design makes it easy to turn your road, mountain, or TT bike into a powerful indoor smart trainer. - Made from high strength carbon steel and featuring a wide stance, SNAP is designed to keep its feet firmly planted on the floor and your bike securely locked in so you can train with confidence. - When connected to your device, it automatically sets your resistance via your favorite app or software - The SNAP flywheel is innovative and proven technology emulates the power and inertia experienced during outdoor riding. It provides the most realistic ride feel especially when using virtual riding/training platforms like Zwift and Trainer Road. - Get vital cycling metrics on your indoor ride. - Low operating sound, so no shouting required! - Works with popular training apps such as Zwift, The Sufferfest, Fulgaz and TrainerRoad. - Compatible with a third party power meter.

BREAKTHROUGH POWER Built on the cutting-edge SPEEDPLAY pedal platform, POWRLINK ZERO delivers reliably accurate power and cadence data in a race-proven pedal system. This powerful combination creates an unrivaled power pedal that helps cyclists optimize performance to break through to the next level. A POWERFUL COMBINATION POWRLINK ZERO combines proven sports science and years of industry-leading research with the superior adjustability, increased power transfer, reduced weight, and enhanced aerodynamics of the SPEEDPLAY platform to create a pedal system that delivers a distinct performance advantage. BETTER YOUR BEST Accurate to +/- 1%, POWRLINK ZERO’s internal gyroscope removes cadence variation to measure power output more precisely. Combined with Wahoo’s sports-science based algorithms, cyclists get accurate values they can use to achieve next-level performance gains. LASTING POWER POWRLINK ZERO is made with premium materials for superior strength-to-weight ratio – making it perfect for enduring efforts. In addition, the rechargeable battery lasts up to 75-hours per charge to give you the power to go long. Really long. In the box - Left and Right Power Pedals - Washer (x2) - Cleat Assembly - Screw Packet - Charging Cable and Clips - Quick Start Guide - Important Product Information Guide Additional Tools Required for Assembly: #1 and #2 Philips Head Screwdriver and 8mm Allen Wrench"

WD-40 Dry Lube is the perfect chain and component lubrication for dry and arid riding conditions. Extensively tested by scientists and pro mechanics alike, it keeps your bicycle shifting like a dream and pedaling smoothly. It boasts special polymers that form a dry film to protect your chain and repel dirt in dry conditions. The result is a clean, quiet, perfectly functioning and long-lasting drivetrain.

WD-40's Wet Lube is the perfect bicycle lubricant for riding in wet and muddy conditions. Their exclusive formula has been tested and proven by mechanics and cyclists and is amped up for premium lubrication. Wet Lube improves shifting and extends the life of your chain and drivetrain components by repelling moisture and gunk. - For extreme wet and muddy riding conditions. Works well in winter conditions as well (handles cold well) - Improves shifting and extends chain life by repelling moisture and gunk - Goes on wet, stays wet - Does not contain wax - Specifically developed for bicycles and thoroughly tested by WD-40 scientists in partnership with IBDs, pro bike mechanics, and pro cyclists

Tri-Flow Superior Lubricant is a light viscosity lube that allows for deep penetration into hard to reach moving parts. - Ideal for all conditions - wet, dry, road and trail - High grade petroleum oils provide optimum lubrication under extreme temperatures (-60 to 475F) and humidity

Tri-Flow Superior Lubricant is a light viscosity lube that allows for deep penetration into hard to reach moving parts. - Ideal for all conditions - wet, dry, road and trail - High grade petroleum oils provide optimum lubrication under extreme temperatures (-60 to 475F) and humidity

A premium insulated water bottle that lets you carry more cold water for lasting refreshment on long, hot rides. Colder for longer The only thing better than fresh water on a long, hot ride is cold fresh water—that stays cold. Voda Ice is an insulated water bottle that keeps your water cold for longer and comes in a game-changing 28-ounce size that lets you carry more of it. The premium Flow Top cap and No-Drop Grip Ring give this bottle a great in-hand feel with easy-squeeze hydration. Product details - A premium insulated bottle that keeps water cold, feels great in-hand, and provides leak-free closure - Form fit insulation layer keeps water cold twice as long as traditional bottle - Flow Top cap's heart valve and soft-touch poppet offers easy-squeeze hydration - Secure threaded cap with easy open-and-close poppet locks down leaks - No-Drop Grip Ring provides a grippy texture for confident grasp even when wet - Designed for easy cage entry and removal with secure retention - Optimized for use with a Side Load cage - USDA approved and free of BPAs and phthalates

Used on every US Naval ship for the past 15 years Trek Certified Service's recommended solution for various locations throughout sales and service space. Premium, Trek branded floor mat with military-grade anti-fatigue qualities. - Trek Certified Service's solution for work stations throughout sales and service - Same high-quality construction used on every US Naval ship for the past 15 years - A top layer of clear protectant helps protect from stains and spills - To maintain anti-fatigue properties, any mat needs replacement every 3 years - Entirely made in Minnesota and measures 36" x 72" (91.5 x 183 cm) - See the advanced manufacturing process at: https://youtu.be/RQ5_dL8M9No - Best cleaned with warm water and mild detergent - Allow an initial 24-48 hours for mat to lay flat properly

Our best light, bright enough for trail riding, and with Kindbeam to keep light on the trail and out of oncoming riders' eyes. Do the (b)right thing A do-it-all front light that's powerful enough for off-road riding. Kindbeam keeps more light on the trail ahead of you while avoiding oncoming rider's eyes, for a bright light that won't blind other trail users. A visible fuel gauge, wireless connection to tail light, and Charge-back that works as a battery bank for charging gadgets, round out an industry-leading set of features and make this our best front light option. - Commuter Kindbeam keeps light on the ground ahead of you and out of oncoming riders' eyes - 1000 Lumen high beam setting lights up full path or trail, ideal for use as MTB light - Wirelessly pair with Flare RT for single-button power-up on both front and rear light - Dual fuel gauge clearly shows available battery life and battery life of paired light - USB-C charging port supports chargeback for recharging phone or cycling computer on-the-go - DRL-specific focus, flash, and range flash patterns offer ultimate daytime visibility - Runtimes: high 1000LM — 1.5hrs, low 500LM — 3hrs, day flash 300 LM — 12hrs - Includes Commuter Pro RT light, Adjustable hard mount, and USB-C charging cable

Genuine replacement parts. Achieve your ultimate aerodynamic and hydration goals. Details: - For optimal aerodynamic position. - Designed to fit seamlessly with the 3rd Generation Trek Speed Concept SLR - Please consult the assembly manual before attempting to service

A bright front light with Kindbeam, designed to keep light on the path ahead and out of oncoming riders' eyes. - Commuter Kindbeam keeps light on the ground ahead of you and out of oncoming riders' eyes - Color-temperature balanced beam with a clean cutoff pattern for confident night riding - DRL-specific focus, flash, and range flash patterns offer ultimate daytime visibility - Long-lasting brightness exceeds FL1 industry standards and outlasts the competition - Runtimes: high 450LM — 1.5hrs, low 200LM — 6hrs, day flash 300 LM — 12hrs - Blendr-compatible for integrated mounting on compatible Blendr stems, helmets, and helmet mounts - Quick Connect+ offers secure installation with a flexible mount that's compatible with all bars 22.2 to 35mm - Includes Ion Comp R light, Adjustable Quick Connect+ Mount, and micro USB charging cable

A dependable water bottle capable of carrying 34 ounces of hydration for lasting refreshment on your longest rides - 34 ounces of hydration with great feel & consistent closure - Fits best on M to XL bikes. Side load cages are recommended for easy entry and removal. - Pop Top's soft thermoplastic poppet is easy to open and close - Bottle and cap are dishwasher safe and recyclable - USDA approved and free of BPAs and phthalates - Long-lasting graphics resist scratching for a look that lasts

The Voda Water Bottle gives you clean, consistent, at-the-ready hydration on any ride. It's made from recyclable, FDA-approved materials free from BPAs and Phthalates. Plus, it has a Pop Top cap that's easy to open and secure when closed for consistently leak-free transport. - Redesigned bottle and cap feature all-new materials for great feel and consistent closure - Pop Top's soft thermoplastic poppet is easy to open and close - Designed for easy entry/removal and secure retention - Bottle and cap are dishwasher safe and recyclable - USDA approved and free of BPAs and phthalates - Long-lasting graphics resist scratching for a look that lasts - Manufactured in the USA

The Voda 15 Water Bottle is clean, consistent, at-the-ready hydration for any ride. The compact size provides 15 ounces of thirst-quenching hydration that's designed to easily fit on smaller bike frames. It's made from recyclable, FDA-approved materials free from BPAs and Phthalates. Plus, it has a Pop Top cap that's easy to open and offers secure closure for leak-free transport. - Compact 15-ounce size easily fits into smaller frames and on kids bikes - Pop Top's soft thermoplastic poppet is easy to open and close - Designed for easy entry/removal and secure retention - Bottle and cap are dishwasher safe and recyclable - USDA approved and free of BPAs and phthalates - Fun, long-lasting graphics resist scratching for a look that lasts - Manufactured in the USA

Voda Flow is a premium water bottle with great in-hand feel and a Flow Top cap that offers lockable easy-squeeze hydration. The No-Drop Grip Ring adds a texture for a confident grasp even when wet, and it's all wrapped up with long lasting graphics that stay looking fresh for miles to come. Recyclable, FDA-approved materials are free from BPA's and Phthalates. - A premium bottle that provides great in-hand feel and consistent leak-free closure - Flow Top cap's heart valve and soft-touch poppet offers easy-squeeze hydration - Secure threaded cap with easy open-and-close poppet locks down leaks - No-Drop Grip Ring provides a grippy texture for confident grasp even when wet - Designed for easy cage entry and removal with secure retention - Bottle and cap are dishwasher safe and recyclable - USDA approved and free of BPAs and phthalates - Manufactured in USA with long-lasting graphics that resist scratching