Filter By:
- Parts & Accessories (10)
- Combos/Systems (9)
- Headlights (13)
- Taillights (14)
- Show More Brands
- Show Fewer Brands
Lighting
$27.00
Unlock all the functions of the Flux light with this two button remote.
• Compatible with both the Flux Expert and Elite Headlights.
• Lights up while the Flux headlight is on and repeats the Mode button and adds the Highbeam button (see Flux Headlight Manual for details)
• Note: The remote is a "slave" unit and can turn a Flux headlight off but does not operate until the headlight has been turned on using the main button on the headlight.
$25.99
See and be seen with original equipment lighting.
GENUINE REPLACEMENT PARTS
Safety is a prerequisite for every ride so keep yourself protected and secure with the lighting your bike was designed for.
PRODUCT DETAILS
- Powered by Dynamo front hub
- Includes mounting bracket
$25.00
Portland Design Works' Fenderbot Taillight shines brightly to enhance your visibility when the sky turns dark. It boasts a 1-watt LED with three modes and precision reflector to notify others of your presence. And, the Fenderbot bolts directly to your fender so it's always on your bike.
- Bright red LED and precision reflector
- Bolts directly to fender to prevent theft
- Weatherproof exterior for all season riding
- Weight: 62 g (2.2 oz)
- Runs on 2xAAA batteries (included)
- Lifetime PDWarranty
$25.00
Put this little bright spot anywhere—your belt, your backpack, your seatpost—and ride on. The Flashback is your go-to savior, packing a mighty “I’m here!” punch to keep you visible on the streets. With its belt clip, you can literally clip it on just about anything, and its compact size makes it a total no-brainer for keeping your ride safe and your street-cred high.
- Compact, bright, and waterproof.
- Built-in fabric belt clip makes it a clip-anywhere taillight option (seatpost mount included).
- Four operating modes: Steady (10 lumens), Power Flash (20 lumens), Disco Flash (14 lumens), Eco Flash (5 lumens).
- 2- to 20-hour runtime, depending on mode.
- Tested and approved for the following Specialized helmet models: Align, Ambush Comp, Chamonix, Propero II, Echelon II
$24.99
To further rider safety and visibility, the CherryBomb 100 employs a custom-made, built-in reflector that allows the rider to be night time visible even when the taillight is in the off position. Clip and bike mounts are included for flexible mounting options.
Features
- Lumen Output: 100
- 4 Modes with a Run Time up to 136h
- 2 x AAA Alkaline Battery Powered
- Weight: 82g
- Battery: 2 x AAA Alkaline
- Highly Visible up to 1 Mile
- 100 Lumen Daylight Visible taillight
- Water / Dust Resistant IP64 Rated
Run Time
- Fast Flash—96:00h
- Pulse Flash—136:00h
- Steady High—72:00h
- Steady Low—127:00h
$22.99
- Supplies full wheel illumination for 700c/29in wheels and smaller
- Approximately 40 hrs of battery life
- Water resistant design
- Includes 3 (AA) batteries
- Sold individually (1 wheel)
- Easy to install
$19.99
Blendr is the ultimate integration system for clean and easy installation of lights, computers, and other accessories. Start with a Blendr stem, add the appropriate base, and finish with the Blendr High Ion Light Mount for a clean, flush look that securely holds your Bontrager Ion light above your stem to see and be seen.
Key features:
- Blendr is an elegant, integrated accessory mounting solution
- Provides clean and secure mount for Bontrager Ion headlights
- Works with any Blendr-compatible stem and the accompanying base
- For use with Blendr bases (Pro, XXX, XXX bar/stem, and select Elite bases)
$19.99
The NiteRider Double Taillight Seat Post Mount allows for the installation of 2 NiteRider taillights. It attaches securely with the clamp mount and rubber shims for that perfect fit. Fits seat posts with a 22mm-34.9mm diameter.
It features a quick release tab on each mounting point that allows you to remove just your taillight, leaving the whole mount installed on the seat post; ideal for when you leave your bike unattended or when it's time for a recharge.
SYSTEM COMPATIBILITY
- Sentinel
- Omega 330
- Solas
- Sabre
- CherryBomb
- TL 5.0 SL
- Vmax+ 150
NOT COMPATIBLE WITH Emax+ 150, OMEGA 300, SENTRY AERO 260, AND BULLET 200 TAILLIGHTS
$15.00
The Express Light Accessory fits into the rear vent of the Smith Express MIPS and Express Helmet only. This light may be used as a replacement for your original Express MIPS rear vent light or as an upgrade to your Express Helmet.
Product Details:
- Three light modes: Solid on, Blinking, and Off
- Light color: Red
- CR2032 coin style non-rechargeable battery type (included)
$12.99
Blendr is the ultimate system for clean and easy integrated installation of lights, computers, and other accessories. Start with a Blendr stem, add the appropriate base, and finish with the Blendr MTB Ion Light Mount for a clean, flush look that securely holds your Bontrager Ion light in a perfect position to see and be seen.
Key features:
- Blendr is an elegant, integrated accessory mounting solution
- Provides clean and secure mount for Bontrager Ion headlights
- Works with any Blendr-compatible stem and the accompanying base
- For use with Blendr bases (Pro, XXX, XXX bar/stem, and select Elite bases)
- Integrated tab securely holds brake and derailleur housing to reduce clutter on MTB bikes
$10.95
- Installs under the seat for a low profile, less cluttered appearance
- Easy to install and stays secure in all terrain
- Clamps to most two-rail bicycle saddles
- Use with Cygolite Hypershot and Hotshot tail lights
- Can also be used with GoPro compatible interface
- Premium plastic for strong durability
- Only weighs 23 grams
- Less prone to scratching bikes compared to metal mounts
- Tail light secures to mount without removing from saddle rails
- Designed, engineered, and assembled in the USA
$9.99
A light that's always there when you need it.
- Three-LED headlight with four flash modes
- Visibility range: up to 2,000ft or 600m
- Batteries and stainless steel hardware included
Specifications:
- Battery: AAA (LR03)
- Not rechargeable
- Dimensions: 77 L x 34 W x 44 H (mm)
- Waterproof rating: IPX3
- Weight: 150g
$9.99
The NiteRider Tail Light Rack Mount gives you the option to mount your tail light directly onto your rack-ready/-equipped bike via this rack mount accessory.
System Compatibility
- Sentinel
- Solas
- Sabre
- CherryBomb
- TL 5.0 SL
$5.99
- Quick Charge USB-to-Micro-USB cable to charge your rechargeable Bontrager lights
- Also able to charge most other Micro USB systems
- 9 inches/23cm long
$5.99
The NiteRider Sentry Aero 260 Standard and Aero Seat Post Straps provide options for a proper and correct fitment onto standard and aero seat posts. Installation is easy with the loop around and hook design.
- System compatibility: Sentry Aero 260 Daylight Visible Tail Light only
- Includes: (1) Standard Seat Post Strap, (1) Aero Seat Post Strap
- Standard Strap: 3.625" length with comfortable stretch to 5.5" length, fits 27.2mm seat post
- Aero Strap: 5.5" length with comfortable stretch to 9" length, fits 30.9 or 31.6mm seat post
Previous page
Page 2 of 2