Filter By:
- Show More Brands
- Show Fewer Brands
- Show More Sizes
- Show Fewer Sizes
Parts & Accessories
$13.99
Wire harness and hardware to measure computer data based on the rear wheel
- Contains bracket with 130cm wire, wheel magnet (fits up to 4mm bladed spokes) and zip ties
- Bracket fits most bars (25.4 to 31.8mm)
- Compatible with: Protegé 5.0, 8.0 and 9.0
- Ideal for rear wheel indoor bicycle trainers
$13.99
Protege wire harness and hardware with extra length for use with tandem and recumbent bicycles
- Contains bracket with 160cm wire, wheel magnet and zip ties
- Brackets fits Standard (25.4-26.0mm) bars
- Compatible with: Protegé 5.0, 8.0 and 9.0
- Ideal for long wheelbase recumbent and computer installs on a tandem’s rear bars
$14.99
Garmin's Bicycle Mount Kit lets you attach any compatible Garmin to your bike's handlebars, so the data stays out in front where you can see it.
$14.99
Protect your Garmin Edge 820 (sold separately) with a form-fitting, silicone case and keep your mind at ease. Choose from a variety of cool colors to match your personal style.
$15.00
CatEye's Out Front Bracket frees up your handlebars and positions your favorite CatEye computer just in front of your stem for optimal viewing and accessibility.
$15.99
- Superlight computer/light mount fits cleanly underneath the stem
- Replace a headset spacer(s) below or above the stem on any 1-1/8" steerer
- 12mm stack height with 50mm wide mounting area, 120mm long angle adjustable arm
$17.00
- Use to keep Blips in place on handlebars
- Fits 31.8mm round portion of drop bar
- Clamp mounts directly to bar outside of tape zone
- Ideal for use with thumbs or index fingers while hands are on the tops
- Right and left specific, just like Blips
- Weight: 12 grams (for pair)
- Material: Polypropylene
- Compatibility: 11-speed
- Recommended Group: SRAM RED eTap
$17.49
- Machined protective case that houses the Apple AirTag under your saddle. Apple AirTag sold separately
- Casing is not waterproof but the Apple AirTag is rated IP67 (water resistant)
- Compatible with some saddle bags
- Mounts to saddle rails
$18.79
Enjoy easy viewing with the Butler Out Front handlebar mount!
Out Front Mount for following models:
BC 1909 STS
BC 2209 STS
ROX 5.0
ROX 6.0
ROX 8
ROX 8.1
ROX 9
ROX 9.1
*Note: not for use with ROX 10.0
$18.95
• When aerobar space is tight, place your computer on top
• Tuck straw on either side for best aerodynamics
• Fits on TORPEDO SYSTEM 100, TORPEDO SYSTEM 400 & REFILL UPGRADE KIT BOTTLES (each sold separately)
• Compatible with most computers, including large screens (sold separately)
• Glass-reinforced nylon
• Weight: 18.5 grams
$18.99
Keep your handlebar organized and your devices secure with the SGS-400-OS (27.2/31.8/35.0mm) from Minoura.
- Holds up to 2 accessories (light, computer, mp3, bottle cage holder, etc.)
- Lightweight and rustproof alloy construction
- New LW-Clamp reduces weight 25 grams compared to previous models
- Aluminum bar is position adjustable and uses Hex Bolt to install and remove
- 27mm-35mm diameter
$18.99
Keep your handlebar organized and your devices secure with the SGS-400-STD (22.2/25.4/28.6mm) from Minoura.
- Holds up to 2 accessories (light, computer, mp3, bottle cage holder, etc.)
- Lightweight and rustproof alloy construction
- New LW-Clamp reduces weight 25 grams compared to previous models
- Aluminum bar is position adjustable and uses Hex Bolt to install and remove
- 22mm-29mm diameter
$19.99
$29.99
33% Off
Using super heavy duty rubber, the TrailKASE is designed to conveniently fit any size phone with or without a case on your bicycle while you ride! Using an 1/8 turn (10 o’clock to 12 o’clock), the TrailKASE securely attaches to the handle bar bracket (included). By simply wrapping the rubber case around all 4 corners of your phone, your phone is secure and provides 100% visibility to your screen.
$19.99
Light up the road
Blendr is the ultimate integration system for clean and easy installation of lights, computers, and other accessories. Start with a Blendr stem, add the appropriate base, and finish with the Blendr Universal Ion Mount for a clean, flush look that securely holds your Bontrager Ion light in a perfect position to see and be seen.
- Blendr is an elegant, integrated accessory mounting solution
- Clip can be rotated for compatibility with many Bontrager accessories
- Works with any Blendr-compatible stem and the accompanying base
$19.99
Protect your Edge 1030 with this form-fitting, removable silicone case.
$19.99
- Replacement bike mounts and other accessories for your Garmin products
$19.99
- Replacement bike mounts and other accessories for your Garmin products
$19.99
- Replacement bike mounts and other accessories for your Garmin products
$19.99
Mount your Varia Rearview Radar or Varia Smart Bike Light (each sold separately) to the seat post of a second bike with this quarter-turn mount. Includes mount and 2 fitting shims.
$19.99
Mount your Varia Rearview Radar or Varia Smart Bike Light (each sold separately) to an aero or round seat post with this quarter-turn mount. Includes mount, 2 fitting shims and 4 O-rings.
$19.99
Convert your K-Edge Garmin Computer Mount to be a Computer + Action Camera combination mount. Works with any camera that utilizes the GoPro sytle interface, including GoPro Hero, Garmin VIRB, and Shimano CM-1000.
- Camera Adapter mount with GoPro style interface
- Fits K-EDGE Garmin Mounts (K13-500, K13-505, K13-560)
- Locks GoPro, Shimano, VIRB style cameras underneath Garmin Computer.
- Centers camera in out of site position
- Improves video clarity by removing plastic mount shake
- Colors: Anodized Black
- Weight: 14grams
*Note: Garmin VIRB requires the GoPro adapter that is included in the box with the VIRB.
$19.99
Constructed from a high quality proprietary polymer blend that is super durable.
- Securely locks and perfectly positions your computer
- Fits 31.8, 25.4 & 22.2mm handlebars
- Simple one-bolt design makes installation a breeze
- Compatible with Garmin Edge 20, 25, 130, 510, 520, 530, 810, 820, 830 & various other cycling computers
- Not compatible with Edge 1000 series
$19.99
Constructed from a high quality proprietary polymer blend that is super durable.
- Securely locks and perfectly positions your computer
- Fits 31.8, 25.4 & 22.2mm handlebars
- Simple one-bolt design makes installation a breeze
- Compatible with Wahoo Elemnt, Elemnt Mini, Elemnt Bolt and Elemnt Roam
- Also compatible with Pioneer computers
$19.99
- Machined protective case that houses the Apple AirTag on the bottle cage mount. Apple Air Tag sold separately
- Casing is not waterproof but the Apple AirTag is rated IP67 (water resistant)
- Removal key for T25 bolts security bolts included
- Fits discreetly under a water bottle cage or mounted to accessory top tube bolts
$19.99
- Discreet way to install an Apple AirTag inside your tubeless tire
- Identify the location of a stolen bike, enabling the owner to alert local authorities for retrieval
- AirTag is housed in a 3-part silicone and rubber tubeless valve mount
- Sacrificial stem, ensures tracker and rim protection under impact
- Silicone top cover protects tracker and internal plug reduces sealant ingress
- Supplied with 3 pairs of our rubber valve bases to suit different rim profiles for the optimum seal
- Note the Tubeless Secure Tag Holder can only be used in rear wheels – not for use on the front wheel Compatible tire types:
- MTB tyres (XC, Enduro Trail, Downhill)
- Gravel Tires (the narrowest recommended tyre size is 38mm wide)
$20.40
- Control Center computer mount for any 31.8mm handlebar
- Dual clamps provide superior holding power, excellent for GPS units