Parts

- 11 speed wide range cassette - 7075 Aluminum largest sprocket - Alloy spiders, spacers and lockring - Fits Shimano/SRAM freehub - 465g (11-46); 401g (11-42); 389g (11-40)

Parts for repair and maintenance of DT Swiss hubs. - DT Swiss 240s Shim Ring

Parts for repair and maintenance of DT Swiss hubs. - DT Swiss Shim Ring: for Star Ratchet Hubs with 26mm OD Driveside Bearings

Replacement reservoir cap screw for Hope brakes.

- Brass barrel, 2.2mm cable pass-through, screwdriver slot on both ends

• Designed to keep dust and dirt out of V-Brake cable/housing systems

Internally fitting service parts for Hayes hydraulic disc brake master cylinders. - All HFX-MAG compatible master cylinder internals are designed for the current aluminum piston/2mm push-rod platform (2003 and newer).

- Non-SIS 5mm alloy ferrules - Sold individually - Color: Silver

Sunlite's Cable End Button replaces the worn out piece that goes between your brake cable and the brake lever body. Replacing it along with cables and housing helps add new life to your brakes and shines u the bike, too!

- Aheadset preload adjusting bolt

- Longer B-screw needed when using 40t or 42t cog with most Shimano derailleurs

- Allows quick chain removal without tools - MissingLink 410HD|~|1sp|~|BMX Heavy Duty chain|~|9.4mm|~|each|~| - MissingLink 410|~|1sp|~|BMX|~|8.6mm|~|each|~| - MissingLink II|~|8sp|~|all|~|7.1mm|~|6/card|~| - MissingLink-9|~|9sp|~|all|~|6.6mm|~|6/card|~| - MissingLink-10R|~|10sp|~|KMC, Shimano, SRAM|~|5.9mm|~|6/card|~| - MissingLink-10CR|~|10sp|~|Campagnolo only|~|5.9mm|~|6/card|~| - MissingLink-11|~|11sp|~|Campy, KMC, Shimano|~|5.5mm|~|6/card|~|

KMC 3/16" Master Link Chain Links - For 3/16" chain, extra wide - Extra-wide, for non-derailleur bikes: BMX, cruisers, etc - Perfectly fits on KMC 415H & 415H-NP chains

- Aluminum w/lock nut - 18mm long/6mm O.D.

- Half-link connector allows you to add or subtract half of one link (1/2 inch) from the chain in order to optimize chain tension - Uses standard chain pin connector and tool

- Thermally bonded PTFE coated slick galvanized cable for minimal friction - Premium stainless-slick low-friction, rust-resistant cable - Economy galvanized standard replacement cable - AX-2654 and AX-2657 are double ended, with both Road and MTB anchors - 1700mm length

- Thermally bonded PTFE coated slick galvanized cable for minimal friction - Premium stainless-slick low-friction, rust-resistant cable - Economy galvanized standard replacement cable - 2000mm length

HFX-Mag/-9, El Camino, Stroker Caliper-Hose Connection Seal

- Brake casing has internal lining and external plastic coating - Derailleur casing is compressionless with internal lining and external plastic coating

- Aluminum w/lock nut and mount - Slotted mount design

- Replacement cable anchor bolt for brakes - Includes nut and washer

- Sunlite Cottered Pins

- Crank dust cap - Works with most three-piece crank models

- Crown Race - Size: 27.0mm

- Crown Race MX - Size: MX TH 26.4mm

- Model: Derailleur Bolt & Nut - Compatibility: Mounts rear bracket to frame

- Chrome - Sold individually

- Type: Lock washer - Size: 1" Keyed

- Routes cables underneath the bottom bracket - Will not rust or corrode

Shifting cables for Road/Mountain bikes.

- w/Nut - 1-3/4-inch

- 8x1mm Allen head

- Model: Replacement bolt - Compatibility: Allen, M5x16

- Rubber - Color: Black

Bleed fittings specifically designed for Hayes hydraulic disc brakes.

Race Face Crank Arm Fixing Bolts - For EXI Cranks - Bolt Puller Cap Washer for self-extracting bolt

- Hoods with (FD) are Flight-Deck compatible

- Replacement retaining clip for the Surly Tuggnut/Snuggnut

Brass compression olive for Hope hydraulic disc brakes.

• Compatible with most side pull and center pull brakes • All weather compound

The Gyro G3 upper top plate is designed for use with the G3 detangler.

- For Race Face 30mm Cinch System cranks only - Allows switching crank arms between bikes, such as a FatBike and an XC MTB - Use RF-2999 for 8mm to 16mm hex wrench adapter to remove spindle

Use to create your desired chain length in single-speed applications. Only one half link is needed. - Non-reusable - Width: 9.4 mm - Drivetrain Speeds: 1 - Color: Black - Chain Compatibility: Shimano , SRAM , Campagnolo , Connex , KMC

Finish off that great road bar tape job with Origin-8's Rubber End Plugs. These plugs come in a variety of colors to dress up your rig and fit most handlebars.

Bar end plugs (2)

Product details - Use in chainstay pocket to seal sensor into frame

Air Spring Volume Reduction Kit - Cane Creel Kitsuma Air 1250^3 Negative Volume Reducer

Replacement banjo bolt for Hayes hydraulic Brake systems.

Lizard Skins grip donuts feature a neoprene material printed with the Lizard Skins logo and add comfort to the flange side of the grip.

Standard replacement star nuts for threadless steerers.

- Preload collar for adjusting tension on bottom bracket bearings - For Race Face 30mm Cinch System cranks only

- Includes everything needed to mount non-threaded brake pads to cantilever brake arms

- Size: 1/2x1/8 & 3/32 (set) - Links: 1 each per bag

- For MTB levers - 7mm x 1mm - Aluminum construction

- Oversize 10mm - Fits new style MTB & BMX levers - Aluminum construction

- M8 Top Plate Nut

• With bolt & nut • 1 1/8-inch = 28.6mm • 1-inch = 25.4mm

- Fits cantilever brakes - Sold individually

- Steel cable noodle with alloy end caps - Includes plastic liner

- Standard steel replacement